Rugged industrial WLAN access point which can be used in access mode, client mode or for wireless bridge connections.
The WI1003n is an industrial-grade access point that offers IP40 class environmental protection and is suited to a wide range of industrial applications or uses in other harsh surroundings. The device`s robust metal housing and large operating temperature range make it suitable for use in difficult environmental conditions.
It`s equipped with a high-performance 802.11 abgn radio module and MIMO 2x2 technology, enabling raw data rates of up to 300 Mbps. The radio module can be used in either the 2.4 GHz or 5 GHz frequency bands.
Thanks to the availability of these different operating modes, the device gives operators a great deal of flexibility. In addition functioning as an access point, the bintec WI1003n can also operate as a wireless LAN client or establish bridge links. In bridge link mode, this model`s high transmission power of 200 mW at 5 GHz and excellent sensitivity give you extended range and higher transmission rates.
Wireless connectivity for moving equipment
When used in its WLAN client mode, the bintec WI1003n offers an easy way to connect machines to the company network. By scanning for suitable radio channels in the background, the bintec the WI1003n can switch to the next access point with practically no interruption whatsoever when a machine moves out of range of its current access point.
The bintec WI1003n for logistics
If you need to provide wireless coverage across a large storage facility, for instance to connect handheld scanners to your inventory management system, the bintec WI1003n in conjunction with a bintec WLAN Controller is an ideal solution. The WI1003n`s IAPP protocol together with careful radio cell planning ensures optimal roaming behavior for your wireless scanners in this scenario.
To configure individual devices, all you need is an internet browser. The device`s integrated web server allows for rapid configuration and monitoring via the graphic user interface. If you are using the devices as access points however and plan to install more than two of them, a managed network that includes a bintec WLAN Controller is the preferred solution
Optimize your WLAN network by using a bintec WLAN controller. The bintec WLAN controller allows configuration of your customers WLAN network in lesser than 30 minutes ... and this without deeper WLAN know-how! The automatic RF management system relieves you the time killing search for free WLAN channels and selects the best channels for the system.
For smaller WLAN networks up to 6 APs bintec access points are able to take over the function of the WLAN controller by themself and work as quasi master APs. For networks with up to 12 APs you will need a bintec RS series router as WLAN controller hardware. You are able to manage bigger WLANs with up to 150 AP by using a bintec RXL12x00 as WLAN controller hardware.
Mounting and installation
The WI1003n is suitable for standard wall mounting. You can alternatively use the included DIN rail adapter for mounting the device on a control panel in any of four different directions. The unit can be powered either via PoE or a 100-240V plug-in adapter.
Operation ModesWLAN AP
WLAN Access Point stand-alone or WLAN Access Point managed by a WLAN Controller or WLAN Master-Access Point can control up to 5 additional AP
WLAN Bridge link Point-to-Point or Point-to-Multipoint
WLAN Client operation
Wireless LANWLAN standards
802.11n (MIMO 2x2); 802.11b; 802.11g; 802.11a; 802.11h
Frequency 2,4 GHz Indoor/Outdoor
2,4 GHz Indoor/Outdoor (2412-2484 MHz)
Frequency 5 GHz Indoor
5 GHz Indoor (5150-5350 MHz)
Frequency 5 GHz Outdoor
5 GHz Outdoor (5470-5725 MHz)
2,4 GHz Operation: 802.11b only; 802.11g only, 802.11b/g/n mixed; 802.11b/g/n mixed long; 802.11b/g/b mixed short; 802.11b/g/n ; 802.11g/n; 802.11n only
5 GHz Operation: 821.1a only; 802.11a/n; 802.11n only
TX Power @ 2,4GHz
802.11b/g 18dBm; 802.11n/2,4G/HT20 18dBm all values without antenna gain
TX Power @ 5GHz
802.11a 24Mbps 21 dBm; 54Mbps 18dBm; 802.11n/5G/HT20 MCS0 21dBm; MCS7 16dBm; 802.11/5G/HT40 MCS0 20dBm; MCS7 15dBm all values without antenna gain
802.11b 1Mbps -95dBm; 5,5Mbps -93dBm; 11Mbps -92dBm 802.11g 6Mbps -95dBm; 12Mbps -93dBm; 24Mbps -87dBm; 54Mbps -81dBm 802.11n/2,4G/HT20 MCS0 -95dBm; MCS7 -78dBm 802.11n/5G/HT20 MCS0 -94dBm; MCS7 -77dBm 802.11n/5G/HT40 MCS0 -92dBm; MCS7 -73dBm
TX Power adjustable
5dBm, 8dBm, 11dBm, 14dBm, 17dBm, max.
Automatic or manually
Automatic Rate Selection
Number of spatial streams (802.11n)
1 or 2
Up to 16 SSID per radio with own MAC address for each SSID. Each SSID can assign to a VLAN to separate the traffic.
Optimizing the throughput when slow clients or clients there are far away are connected
Client load balancing
Avoid overloading of the AP in the case that many users are connected. Allow the movement of clients to other AP in case of high load.
Limitation of the number of clients
From 1to 250 clients. It could be useful to allow more than 32 clients with applications with low bandwidth requirement.
A maximum throughput can be defined for each client. Defineable or each SSID
TPC (Transmission Power Control): For 5 GHz, automatic TX power reduction according EN301893)
DFS (Dynamic Frequency Selection) for 5 GHz
WMM 802.11e QoS
Data priority for TOS tagged data according 802.11e/WMM
WMM 802.11e Power Save
Supports WLAN Clients there supporting 802.11e power save and U-APSD
Seamless Roaming through IAPP (Inter Access Point Protocol) support according 802.11f useful for VoWLAN phones and for Wireless Barcode scanner.
Software Features for AP stand-alone operationCaptive portal function / HotSpot
Additional external RADIUS server or bintec HotSpot license required
NTP Client, NTP Server, manually
DHCP client, DHCP server, DHPC relay
IPsec, L2TP, PPTP, GRE
Software Features for WLAN Client operationFunctionallty
Layer 2,5 Bridge for connect several IP based device and one non-IP device to a wireless network.
Open, WEP64 (40 Bit key), WEP128 (104 Bit key), WPA Personal, WPA2 Personal
Selectable (no, slow, normal, fast, customized roaming). For fast moving clients (i.e. vehicles) to be archive a seamless roaming. This feature is realized by scanning the relevant channels in the background.
Show a list of available AP in the area
For one SSID, manually configuable or configuable by using the scanning function
Detailed information for each link (Uptime, Signal, Noise, Data rate, …)
Software Features for WLAN Bridge operationConfiguration
Applicable as Access-Point/Bridge-Link Master or as Bridge-Link Client
For Point-to-Point or for Point-to-Multipoint (up to 8) applications.
DFS (Dynamic Frequency Selection) for 5 GHz works without interruption every 24h
Detailed information for each link (Uptime, Signal, Noise, Data rate, ...)
Open, WEP64 (40 Bit key), WEP128 (104 Bit key), WPA Personal, WPA Enterprise, WPA2 Personal, WPA2 Enterprise
IEEE802.11i authentication and security
802.1x/EAP-MD5, 802.1x/EAP-TLS, 802.1x/EAP-TTLS, 802.1x/EAP-PEAP, Key Management, PSK/TKIP Encryption, AES Encryption, 802.1x/EAP
Access control list (ACL)
MAC address filter for WLAN clients (white list) and dynamic and static blacklist. Black list function requires WLAN Controller
WIDS (Wireless Intrusion Detection System)
Rogue AP detection: detect foreign Aps, which try to sp out data via SSIDs by permanent background scanning. When the attack is detect a SNMP trap or a email alert can be send. This functionality requires WLAN Controller.
WIDS (Wireless Intrusion Detection System)
Neighbor AP detection: Detect AP in the neighborhood, which can reduce the performance at the own network. In case of detection a SNMP trap or a email alert can be send.This functionality requires WLAN Controller.
WIPS (Wireless Protection Detection System)
Rogue Client Detection: detection and protection detect conspicuous clients, which try to intrude or interfere the wireless network.In threat case blocking by dynamic black list. This functionality requires WLAN Controller.
Network separation at layer 2. For each SSID ist one VLAN ID possible. Static VLAN configuration according IEEE 802.1q, supports up to 32 VLANs.
Inter traffic blocking for public HotSpot (PHS) applications for preventing of communication WLAN client to WLAN client in a single radio cell
Syslog Client with different level of the messages
Automatic eMail if any defined event occurs
Statistic information for all physical and logical interfaces
Detailed information about the radio, SSIDs, Bridge link, clients. For each link MAC address, IP address, TX packets, RX packets, signal for each antenna, Signal/Noise value, data rate.
WLAN History view
Show the performance values based on WLC, AP, SSID, Client level help to detect any bottlenecks
The following events are plan able: device reboot, activate/deactivate interfaces, activate/deactivate SSIDs, trigger of software update, trigger of configuration backup
Administration / ManagementHTTP/HTTPS
Web based configuration
Via Telnet, SSH, HTTP, HTTPS, SNMP
SNMP (v1, v2, v3), USM Model, VACM Views, SNMP Traps (v1, v2, v3) selectable, SNMP IP access list configurable
Complete Management according MIB-II, MIB 802.11, Enterprise-MIB
Support SSH V1.5 and SSH V2.0 for secure connection of terminal application
Backup/Restore to/from file
Optional encrypted backup file
Optional automatic backup via scheduler
WLAN Controller operation
Manageable with the bintec WLAN Controller according CAPWAP (DHCP option RFC1517)
Integrated WLAN controller for 5 additional bintec AP
Two interfaces 10/100/1000 Mbps, autosensing, auto MDI/MDIX
Two external omni antennas with RSMA connectors which support 2,4 and 5 GHz. Antenna gain approx. 2 dBi
9-12V/1A DC ; 100-240V AC wall adaptor with Euro plug or PoE according 802.3af or 802.3at (Wall adaptor and PoE injector not included)
ca. 6,5 Watt
-20 - 50 °C
Rugged full aluminum housing with integrated theft protection
Theft protection integrated, Kensington ® compatibel
Wall, Ceiling or DIN Rail mounting (mounting units include)
Directive 2014/53/EU, 2011/65/EU, 2009/125/EU, EN 60950-1; EN 62311; EN 301489-1; EN301489-17; EN 300 328; EN 301893; EN 50581
IP40 protected for industrial application
bintec W Series / WO Series / WI Series
- Poster Installation bintec WLAN and Industrial WLAN v6.0 - German/English
- Poster Installation bintec WO1003ac / bintec WO2003ac - German/English
- User Manual - German
- User Manual - English
- Note to discontinuation of traffic list concept - German
- Notes for changes of the default access data - German/English
- Open Source
- Release 10.2. Rev. 7 Patch 3
- Release 10.2. Rev. 7 Patch 1
- Release 10.2. Rev. 7
- Release 10.2. Rev. 6 Patch 2
- Release 10.2. Rev. 6 Patch 1
- Release 10.2. Rev. 6
- Release 10.2. Rev. 5
- Release 10.2. Rev. 4 Patch 1
- Release 10.2. Rev. 3
- Release 10.2. Rev. 2 Patch 2
- Release 10.2. Rev. 2 Patch 1
- Release 10.2. Rev. 2
- Release 10.1. Rev. 23 Patch 2
- Release 10.1. Rev. 23 Patch 1
- Release 10.1. Rev. 23
- Release 10.1. Rev. 21 Patch 3
- Release 10.1.10 Patch 7
- Release 10.1. Rev. 10 Patch 6
- Release 10.1. Rev. 10 Patch 3