Spanish EnglishGerman



bintec W2022ax

Wi-Fi 6 WLAN Access Point


  • Wi-Fi 6 Multi-User-MIMO 2x2 for Up- und Downlink
  • Dual concurrent radio for simultaneous 2,4/5 GHz operation
  • Multi-Gigabit Ethernet 2,5 Gbit/s
  • Wall and ceiling mounting
  • Flexible management solutions
  • 5-year hardware warranty





bintec W2022ax

Wi-Fi 6 Access Point for Mid-Density wireless networks


With the bintec W2022ax you get a powerful access point of the current Wi-Fi 6 generation with an attractive price-performance ratio. The bintec W2022ax transmits simultaneously in the 2.4 GHz and 5 GHz band in the 802.11ax standard. In the 5 GHz band, a physical bandwidth of up to 1201 Mbit / s @ 80MHz is achieved, and in the 2.4 GHz band, a physical bandwidth of up to 574 Mbit / s @ 40MHz  or 287 Mbit / s @ 20MHz is achieved. The MU-MIMO 2x2 technology with two spatial streams is perfect for the high-performance Wi-Fi of environments such as offices, hotels and logistics areas. The bintec W2022ax can of course be managed via the bintec WLAN controller or via our cloud solution be.SDx.

Like the bintec W2022ac (Wi-Fi 5), the new bintec W2022ax offers security at the highest level with the integration of the latest WPA3 security standard.

A ceiling bracket is available as an accessory and enables installation on suspended system ceilings without drilling or dowels, or direct installation on wood or concrete ceilings. The optional ceiling bracket is not required for mounting on the wall. Customers who move from our Wi-Fi 5 Access Point W2022ac can continue to use the previous drill holes and the previously used ceiling bracket, making the upgrade to the new wireless standard child's play.


bintec elmeg offers a five-year guarantee on the hardware of the bintec W2022ax.

 

WLAN AP
WLAN Access Betrieb
WLAN Standards
802.11ax/n (MIMO 2x2); 802.11b/g 2,4 GHz
Tx Power @ 2.4 GHz
Aggregated TX power including antenna gain 20dBm
Frequency bands 2.4 GHz indoor/outdoor (EU)
2.4 GHz Indoor/Outdoor (2412-2484 MHz)
Auto channel plan
World mode (1,6,11); ETSI mode (1,5,9,13), user defined
Data rates for 802.11b,g (2.4 GHz)
11, 5.5, 2 und 1 Mbps (DSSS modulation); 54, 48, 36, 24, 18, 12, 9 and 6 Mbps (OFDM modulation)
Data rates for 802.11n, 20 MHz channel bandwidth
MCS0-15 allow up to 150 Mbps PHY rate at 20 MHz channel bandwidth, 2 streams, Short guard Intervall. Up to 173,3 Mbps (QAM-256) together with clients there support QAM-256.
Data rates for 802.11n, 40 MHz channel bandwidth
MCS0-15 allow up to 300 Mbps PHY rate at 40 MHz channel bandwidth, 2 streams, Short guard Intervall. Up to 400 Mbps (QAM-256) together with clients there support QAM-256.
Data rates for 802.11ax, 20 MHz channel bandwidth
MCS11 (QAM-1024) allow up to 287 Mbps PHY rate at 20 MHz channel bandwidth, 2 streams, Short guard Intervall.
Data rates for 802.11ax, 40 MHz channel bandwidth
MCS11 (QAM-1024) allow up to 574 Mbps PHY rate at 40 MHz channel bandwidth, 2 streams, Short guard Intervall.
Output power limitation
Adjustable in 1dBm steps from 5dBm to 20dBm
Output power @ 2.4 GHz
Max. 20dBm
Automatic Rate Selection (ARS)
Available
Transmission rate
Automatic
Number of spatial streams (802.11ax/n)
1 or 2
Bandwidth (802.11ax/n)
20 MHz / 40MHz with coexistence check
OFDMA (Wi-Fi 6)
OFDMA (Orthogonal Frequency Division Multiple Access) allow a more efficient and simultan communication with multiple clients.
BSS Coloring (Wi-Fi 6)
Allow a more efficient reuse of radio channels.
TWT (Wi-Fi 6)
Target Wake Time (TWT) reduce the battery consumption of mobile and IoT devices.
Short guard interval (802.11ax/n)
On/off switchable; increase of throughput by reduction of the guard intervals from 800ns to 400ns
DTIM Period
Adjustable
Extended Performance Feature
Beamforming, MRC (Maximum Ratio Combining), Block-Acknowlegde, STBC (Space Time Block Coding), LDPC (Low Density Parity Check
Multi SSID
Up to 16 service sets, with virtual access points, own MAC address and optional with own VLAN-ID per SSID
Broadcast SSID
On/off switchable
WLAN Standards
802.11ax/ac/n/a; MU-MIMO 2x2; 20/40/80 MHz; 5 GHz
Tx Power @ 5 GHz
Aggregated TX power including antenna gain 23 dBm
Frequency bands 5 GHz indoor
5 GHz indoor (5150-5350 MHz) max. 200 mW EiRP. This information is related to the permitted transmission power in the ETSI regulation domain.
Frequency bands 5 GHz outdoor
5 GHz outdoor (5470-5725 MHz) max. 200 mW EiRP. This information is related to the permitted transmission power in the ETSI regulation domain.
Auto channel plan
All (36-140); No weather radar channels (36-116, 132-140); No Outdoor channels (36-64); Indoor No DFS/TPC (36-48); user defined
Data rates for 802.11a,h (5 GHz)
54, 48, 36, 24, 18, 12, 9 and 6 Mbps (OFDM modulation)
Data rates for 802.11n, 20 MHz channel bandwidth
MCS0-15 allow up to 150 Mbps PHY rate at 20 MHz channel bandwidth, 2 streams, Short guard intervall
Data rates for 802.11n, 40 MHz channel bandwidth
MCS0-15 allow up to 300 Mbps PHY rate at 40 MHz channel bandwidth, 2 streams, Short guard intervall
Data rates for 802.11ac, 20 MHz channel bandwidth
Allow up to 173 Mbps PHY rate with two streams or up to 87 Mbps PHY with one stream.
Data rates for 802.11ac, 40 MHz channel bandwidth
Allow up to 400 Mbps PHY rate with two streams or up to 200 Mbps PHY with one stream.
Data rates for 802.11ac, 80 MHz channel bandwidth
Allow up to 867 Mbps PHY rate with two streams or up to 433 Mbps PHY with one stream
Data rates for 802.11ax, 20 MHz channel bandwidth
Allow up to 287 Mbps PHY rate with two streams or up to 143 Mbps PHY with one stream.
Data rates for 802.11ax, 40 MHz channel bandwidth
Allow up to 574 Mbps PHY rate with two streams or up to 287 Mbps PHY with one stream.
Data rates for 802.11ax, 80 MHz channel bandwidth
Allow up to 1201 Mbps PHY rate with two streams or up to 600 Mbps PHY with one stream.
Output power limitation
Adjustable in 1dBm steps from 5dBm to 23dBm
Output power @ 5 GHz
Max. 23 dBm (200mW EiRP)
Automatic Rate Selection (ARS)
Available
Transmission rate
Automatic
Number of spatial streams (802.11ax/ac/n)
1 or 2
Bandwidth (802.11n)
20/40 MHz
Bandwidth (802.11ax/ac)
20/40/80 MHz
OFDMA (Wi-Fi 6)
OFDMA (Orthogonal Frequency Division Multiple Access) allow a more efficient and simultan communication with multiple clients.
BSS Coloring (Wi-Fi 6)
Allow a more efficient reuse of radio channels.
TWT (Wi-Fi 6)
Target Wake Time (TWT) reduce the battery consumption of mobile and IoT devices.
Short guard interval (802.11ax/ac/n)
On/off switchable; increase of throughput by reduction of the guard intervals from 800ns to 400ns
DTIM Period
Adjustable
Extended Performance Feature
Beamforming, MRC (Maximum Ratio Combining), Block-Acknowlegde, STBC (Space Time Block Coding), LDPC (Low Density Parity Check)
Multi SSID
Up to 16 service sets, with virtual access points, own MAC address and optional with own VLAN-ID per SSID
Broadcast SSID
On/off switchable
WLAN security modes
WPA3-SAE; WPA2/3-PSK; WPA2-PSK; WPA1/2-PSK; WPA-PSK; WPA3-Enterprise ; WPA2/3-Enterprise; WPA2-Enterprise; WPA1/2-Enterprise; WPA-Enterprise; Offen, OWE; OWE-Transition
IEEE802.11i Authentication and encryption
802.1x/EAP-MD5, 802.1x/EAP-TLS, 802.1x/EAP-TTLS, 802.1x/EAP-PEAP, key management, PSK/TKIP encryption, AES encryption, 802.1x/EAP
Multiple RADIUS for WPA/WPA2/WPA3 Enterprise
Up to 8 different RADIUS servers can be configured and assigned to the individual SSIDs.
Access control list (ACL)
MAC address filter for WLAN clients (white list). Up to 256 entries possible.
WIDS (Wireless Intrusion Detection System)
Rogue AP detection: Detect foreign APs there using the own SSID, by permanent background scanning. As a result, attack attempts can be detected in time. This functionality requires WLAN Controller or be.SDx.
WIDS (Wireless Intrusion Detection System)
Neighbor AP Detection: detection of neighbor Aps with possible influence on performance of own network. By detected intrusion: SNMP trap or email alert. This functionality requires the WLAN Controller or be.SDx.
VLAN
Network segments on layer2 is possible. For each SSID one VLAN ID is available. Static VLAN configuration according IEEE 802.1q; up to 16 VLANs supported.
Inter cell repeating
Inter traffic blocking for public HotSpot applications for preventing of communication radio client to radio client in a single radio cell.
Performance Monitoring
Tracks performance values for the Access Point, the SSID anf for the dedicated, connected WLAN clients. This feature helps to analyze performance or to figure out bottlenecks. This feature requires a WLAN Controller or be.SDx.
Airtime Fairness
Prevent performance limitation by slower or distant clients, which block the network.
Client Band Select
Shifting of clients to 5 GHz band
Client Management
Client overload protection (too many clients) and shifting of clients to other APs, if the threshold is reached.
Client Management 802.11k/v
WLAN Client steering to the best Access Point
Data rate trimming
Enhance the system performance by disable lower legacy data rates.
Low SNR threshold management
Clients with weak Signal (Sticky Clients) can disconnected automatically. This improve the roaming behavoiur of the clients and enhance the system performance of the WLAN Network.
Roaming
Seamless roaming with IAPP (Inter Access Point Protocol), support according 802.11f
Fast BSS Transition 802.11r
802.11r restores existing WPA encryption fast when changing to another access point. Supported for WPA2-Personal, WPA3-Personal, WPA2-Enterprise and WPA3-Enterprise.
Broadcast SSID
Data prioritization for TOS data, 802.11e/WMM
WMM 802.11e power save
Support of active WLAN clients, which support 802.11e power save.
U-APSD
Unscheduled Automatic Power Save Delivery. This functionality contributes significantly to raise battery life of Voice-over-WLAN end devices
Multicast Support
IGMP Snooping, Multicast to Unicast converting of WLAN data.
bintec HotSpot
Supported, Router as HotSpot Gateway required
iBeacon
Configurable as iBeacon transmitter with configurable UUID, Major ID and Minor ID. In combination with a suitable APP on a mobile device, presence applications can be realized.
IP addressing
DHCP client or static
DHCP
DHCP client support for IP address, netmask, gateway, DNS, time
MIMO 1x1 shift down
The radio modules switching automatic to MIMO 1x1 operation, when no client is connected
802.3az support
The ethernet interfaces reduce the power consumption automatically, in case that no device is connected. In the case of the usage of a short ethernet cable, the circuit reduce the transmit power.
LED Mode
The LEDs has three operation mode: Status, Flashing, Off
Graphical user interface
Web-based configuration, monitoring and maintenance via HTTP reachable. The user interface is identical with almost all bintec elmeg products
Configuration export and import
Load and save of configurations; save configuration optionally encrypted
Software Maintenance
Software updates free of charge until 2 years after EOS available. Update via file, HTTP or via direct access to the bintec elmeg upload Server.
Internal Log
Output via web-based configuration interface; filter: subsystem, level, message
Interfaces Monitoring
Statistic information of all physical and logical interfaces
WLAN Monitoring
Detailed displays for radio, VSS. Displayed are per link: MAC address, IP address, Up time, TX packets, RX packets, Noise, SNR
Language support
German, English, Spanish
WLAN Controller functionality
Managed by a local WLAN Controller, works as WTP.
Discovery protocol
CAPWAP DHCP option according RFC1517 or by static WLC IP address
Background scanning
Background scanning (can be deactivated) for the detection of threads (WIDS) and for the detection of neighbor APs. The results are reported to the WLC.
Performance Monitoring
Sends the performance data of the Access Point, the SSIDs and for each associated WLAN client to the WLAN Controller. This features helps to analyze bottlenecks.
WLC based scheduler
Activate/Deactivate WLAN SSID
Alerting
WLAN Controller based email and SNMP alerting when a AP is down, for new detected threads.
Supported Cloud Management Systems
bintec be.SDx
Zero Touch Provisioning (ZTP)
Zero Touch Provisioning (ZTP) out of the box without customized pre-configuration
Background scanning
Background scanning (can be deactivated) for the detection of threads (WIDS) and for the detection of neighbor APs. The results are reported to the Cloud Management.
Performance Monitoring
Sends the performance data of the Access Point, the SSIDs and for each associated WLAN client to the Cloud Management. This features helps to analyze bottlenecks.
Cloud scheduler
Scheduled software update
Alerting
Cloud based email alerting when a AP is down, for new detected threads.
Standards and certifications
Directive 2014/53/EU, 2011/65/EU, Regulation (EC) No.1907/2006:2006-12; EN 300 328; EN 301489-1; EN301489-17; EN 301893; EN 62311; EN 50585; EN 60601-1-2 (Medical devices - part 1-2)
LAN / WAN
1 x 100/1000/2500 Mbps Ethernet twisted pair, autosensing, auto MDI/MDI-X
WLAN
One radio module IEEE 802.11b/g/n/ax MIMO 2x2 and a second radio module IEEE 802.11ax/ac/an MU-MIMO 2x2 allow simultaneous operation at 2.4 and 5 GHz.
Bluetooth
Bluetooth 4.2; Bluetooth Low Energy; Up to +9dBm TX power
Antenna
Integrated single band MIMO antenna array with two antenna elements for each radio; 2 dBm gain @ 2,4 GHz; 3 dBm gain @ 5 GHz.
Power supply
External wall power supply 230V / 12V DC, 2A (The wall adaptor is a accessory and not include the shipment).
PoE
Power-over-Ethernet according IEEE 802.3af, compatible with 802.3at PoE injectors
Status LEDs
Status, Activity for WLAN1, WLAN2 and Ethernet, LEDs defeatable
Wall mounting
Integrate at the housing backplane
Ceiling mounting and theft protection
Accessorie required (5520000163) with integrate theft protection via Kensington® lock
Desktop operation
Integrated rubber pads
Dimensions
Approx. 216 mm x 216 mm x 51 mm (width x depth x height)
Weight
Approx. 840 g
Power consumption
Maximum power consumption below 12,95 Watt
Environment
Temperature operating: 0°C to 45°C; storage: -10°C to 70°C; rel. humidity 10 to 95% (non condensing)
Warranty
5 years warranty for the hardware. Not for accessories like power adaptor, .. Online RMA procedure.
Documentation
Quick install guide in German and English languages is part of the delivery. Online help in German and English. The complete user manual is available as download.
Open Source
This product is based on Open Source software, the use is subject to separate license terms. More details can be found in the download area of the product. By purchasing and using the product, you accept these license terms.
Content of delivery
bintec W2022ax; Quick install guide, security Information. Note: The power supply of the devices work via a Power Adapter which is available as accessory or via PoE.

bintec W2022ax Part number: 5510000579

Part number: 5999027522 Power supply 12V with EU socket

Part number: 5530000338 Gigabit PoE Injector

Part number: 5520000163 Ceiling mounting W2022ac/W2022ax/W2044ax

Request Info
X