The bintec RS353jwv with its combined VDSL/ADSL2+ Modem (Annex B/J), dual-band WLAN (802.11n) and ISDN S0 interface is ideal for use in home offices and at small branch locations.
The bintec RS353jwv is a powerful professional VPN router for high-speed internet access. With its combination VDSL2 and ADSL 2+ modem, this model gives small and mid-sized companies the foundation they need to establish state-of-the-art, robust internet connectivity. The integrated 802.11n wireless module also provides wireless data connectivity for enterprise applications.
The RS353jwv delivers advanced security, flexibility, and exceptional performance across a wide range of applications. The combination VDSL2 and ADSL2+ modem supports both the Annex B (ADSL over ISDN, used primarily in Germany) ADSL standard as well as all digital mode Annex J without a splitter. It is also compatible with the popular ”all IP” service of Deutsche Telekom. The system also has a state-of-the-art dual-band wireless module which operates at 2.4 and 5 GHz. This module supports all current wireless standards including 802.11 a/b/g/n. The MIMO 2x2 technology allows for maximum raw data rates of up to 300 Mbps.
This router boasts a fan-less metal housing, offers long-term reliability for business-critical applications, and makes an ideal access router for small and mid-sized enterprises (SMEs), branch locations, and home offices.
Thanks to the included 19” rackmount conversion bracket, customers can easily integrate this model into 19” server racks or operate it on the desktop. Rack mounting is further simplified by the device height of exactly one rack unit and the integrated power supply.
In addition to the VDSL2 /ADSL2+ modem, the bintec RS353jwv also provides five Gigabit Ethernet ports which can be independently configured for use in a LAN, WAN, or DMZ. The device`s integrated ISDN port can be used for remote configuration access or as an ISDN backup interface. The included five licenses for hardware-accelerated IPSec tunnels provide comprehensive high-speed VPN functionality and allow for secure connections to branch locations and off-site employees. A USB console port allows access to basic router features in critical environments.
With its wide range of WAN connectivity options, the RS353jwv raises the bar for flexibility among access routers.
The fan-free metal housing is a proven, rugged design that has set bintec devices apart from the competition for years. The integrated power supply and 19” conversion bracket now also make it easy to install in a 19” rack.
The bintec RS353jwv is based on a powerful platform with unrivaled capabilities. Customers with VDSL2 connections can double their data transfer rates by taking advantage of VDSL vectoring technology. High speed interfaces handle heavy local network traffic with ease. You can establish links between separate global locations over secure, encrypted VPN tunnels.
The bintec RS353jwv not only delivers outstanding performance, it also provides a comprehensive range of security features. With five simultaneous IPSec channels available, you can establish secure links between branch locations, subsidiaries, and home offices. Optional the quantity of VPN tunnels can be extended to 30 tunnels. The integrated IPSec implementation in bintec routers allows the use of pre-shared keys as well as digital certificates as recommended by Germany`s Federal Office for Information Security. This lets you use a public key infrastructure and ensures maximum security. An object-oriented stateful inspection firewall offers packet filtering to provide additional protection against attacks.
A graphical user interface is the primary means of configuring the router. This fast, web-based interface makes it easy to set up routers using the integrated configuration wizard. Administrators can also manage the devices locally or remotely using configurable telnet, SSH, ISDN login, or GSM dial-in. The bintec DIME Manager is a free software tool that allows administrators to manage up to 50 devices at once.
Ready for the future
Businesses can easily integrate the RS353jwv into existing company networks. This bintec router also allows for a gradual migration to the new IPv6 internet protocol. The integrated VDSL2 modem of the bintec RS353jwv supports VDSL bandplan 998 including profiles 8b and 17a, the standards used in Germany and most other European countries. The modem also supports automatic failover to ADSL2+. With easy migration from ADSL2+ to VDSL2 and support for VDSL vectoring, the professional-grade bintec RS353jwv router is a sound investment in your organization`s future.
WLAN Controller, HotSpot and adult content filtering
The router also includes all the functionality of the bintec WLAN Controller. The bintec WLAN controller lets you configure and monitor small- and mid-sized WLAN networks with up to 12 access points. No matter whether you need frequency management with automatic channel selection, loadbalancing across several access points, support for virtual LANs, or virtual wireless network administration (multi-SSID) - you have all these advanced features at your fingertips with the WLAN Controller. The software continually monitors the entire wireless network, notifying administrators of any malfunctions or security threats.
The router`s integrated HotSpot Gateway together is an ideal complement to the WLAN Controller in combination with a bintec HotSpot license, allowing operators to set up a wireless guest network that requires authentication. This secure separation between the guest network and company network is configured through the WLAN Controller and implemented using virtual wireless networks. An additional highlight is the optional bintec elmeg webfilter which can be used to prevent children and youth from accessing inappropriate content.
Quality of Service (QoS)Layer2/3 tagging
Conversion of 802.1p layer 2 priorisation information to layer 3 diffserv attributes
TCP Download Rate Control
For reservation of bandwidth for VoIP connections
Priority Queuing of packets on the basis of the DiffServ/TOS field
Policy based Traffic Shapping
Dynamic bandwidth management via IP traffic shaping
Dynamic reservation of bandwidth, allocation of guaranteed and maximum bandwidths
2 year manufacturer warranty inclusive advanced replacement
Free-of-charge software updates for system software (BOSS) and management software (DIME Manager)
Redundancy / LoadbalancingLoad Balancing
Static and dynamic load balancing to several WAN connections on IP layer
Optional: Bintec Router Redundancy Protocol for backup of several passive or active devices with free selectable priority
Bandwidth on Demand: dynamic bandwidth to suit data traffic load
Simple VPN backup via different media. Additional enables the bintec elmeg interface based VPN concept the application of routing protocols for VPN connections.
Content of DeliveryPower cable
Power cable with connector according to IEC-60320-C5/C6, length 1.8m, 3-pole
ISDN (BRI/S0) cable
ISDN (BRI/S0) cable, 2m
Two external 3 dBi dipol dualband antennas
VDSL/ADSL cable (RJ45-RJ45), 3m
Guide for the Installation
19" brackets and screws
Two 19" brackets for the switch panel mounting
1 Ethernet cable, 2m
Layer 2 FunctionalityVLAN
Support of up to 256 VLAN (Virtual LAN) for segmentation of the network in independent virtual segments (workgroups)
Enables the router to answer ARP requests for hosts, which are accessible via the router. That enables the remote clients to use an IP address from the local net.
Support of layer 2 bridging with the possibility of separation of network segment via the configuration of bridge groups
Logging / Monitoring / ReportingInternal system logging
Syslog storage in RAM, display via web-based configuration user interface (http/https), filter for subsystem, level, message
External system logging
Syslog, several syslog server with different syslog level configurable
Automatic E-Mail alert by definable events
SNMP traps (v1, v2, v3) configurable
Display of IPSec tunnel and IPSec statistic; output via web-based configuration user interface (http/https)
Statistic information of all pysical and logical interfaces (ETH0, ETH1, SSIDx, ...), output via web-based configuration user interface (http/https)
Detailed display for radio, VSS, bridge links, client links (available in later releases)
Display for each link: MAC address, IP address, TX packets, RX packets, signal strength for all receiver antennas, signal-to-noise ratio, data rate; output via web-based configuration user interface (http/https)
Display of active and past ISDN connections; output via web-based configuration user interface (http/https)
Detailed IP accounting, source, destination, port, interface and packet/bytes counter, transmission also via syslog protocol to syslog server
Detailed ongoing recording of ISDN connection parameter like calling number and charging information, transmission also via syslog protocol to syslog server
RADIUS accounting for PPP, PPTP, PPPoE and ISDN dialup connections
Keep Alive Monitoring
Control of hosts/connections via ICMP polling
Traces can be stored in PCAP format, so that import to different open source trace tools (e.g. wireshark) is possible.
Administration / ManagementRADIUS
Central check of access authorization at one or several RADIUS server, RADIUS (PPP, IPSec inclusive X-Auth and login authentication)
On a RADIUS server configured PPP und IPSec connection can be loaded into the gateway (RADIUS dialout).
Support of TACACS+ server for login authentication and for shell comando authorization
The device system time can be obtained via ISDN and from a SNTP server (up to 3 time server configurable). The obtained time can also be transmitted per SNTP to SNTP clients.
Automatic Time Settings
Time zone profiles are configurable. That enables an automatic change from summer to winter time.
Supported management systems
DIME Manager, XAdmin
Configuring of time and event controlled tasks, e.g. reboot device, activate/deactivate interface, activate/deactivate WLAN, trigger SW update and configuration backup
Configuration Interface (FCI)
Integrated web server for web-based configuration via HTTP or HTTPS (supporting self created certificates). This user interface is by most of bintec elmeg GmbH products identical.
Software updates are free of charge; update via local files, HTTP, TFTP or via direct access to the bintec elmeg web server
Remote maintenance via telnet, SSL, SSH, HTTP, HTTPS and SNMP (V1,V2,V3)
ISDN remote maintenance
Remote maintenance via ISDN dial-in with checking of the calling number. The ISDN remote maintenance connection between two bintec elmeg devices can be encrypted.
GSM remote maintenance
Remote maintenance via GSM login (external USB UMTS (3G) modem required)
Device discovery function
Device discovery via SNMP multicast.
On The Fly configuration
No reboot after reconfiguration required
SNMP (v1, v2, v3), USM model, VACM views, SNMP traps (v1, v2, v3) configurable, SNMP IP access list configurable
Complete management with MIB-II, MIB 802.11, Enterprise MIB
Configuration export and import
Load and save configurations, optional encrypted; optional automatic control via scheduler
Supports SSH V1.5 and SSH V2.0 for secure connections of terminal applications
Integration into Network Node Manager
Support of XAdmin roll out and configuration managemant tool for larger router installations (IP+ISDN+GSM)
Configuration via USB
Configuration interface is available
5 x 10/100/1000 Mbps Ethernet Twisted Pair, autosensing, Auto MDI/MDI-X, up to 4 ports can be switches as additional WAN ports incl. load balancing, all Ethernet ports can be configured as LAN or WAN.
IEEE 802.11a/b/g/n; 1 radio module, Mimo 2x2 für 2.4 und 5 GHz band
External WLAN antenna connectors
Three reverse SMA antenna connectors for external WLAN antennas
USB 2.0 host
USB 2.0 full speed host port for connecting LTE(4G) or UMTS(3G) USB sticks (supported sticks: see www.bintec-elmeg.com)
Service-Interface USB 2.0 plug B (driver: see www.bintec-elmeg.com)
ADSL over ISDN (compatible to U-R2 connection of Deutsche Telekom)
ISDN Basic Rate (BRI)
1 x BRI (TE), 2 B channels
System time persists even at power failure for some hours.
Integrated in housing
Possible, rubber pad included the package
Temperature range: Operational 0°C to 40°C; storage -25°C to 70°C; Max. rel. humidity 10 - 95% (non condensing)
Internal power supply 110-240V, AC 50/60Hz, 0.7A, with energy-efficient switching controller
Power consumption (idling)
Less than 5 Watt
Metal case, opening for Kensington lock, prepared for wall mounting
Ca. 265 mm x 40 mm x 170 mm (W x H x D)
Fanless design therefor high MTBF
Restart or reset to factory state possible
Power, Status, 10 * Ethernet, VDSL, ISDN, WLAN, USB, LTE
Supported from Release 9.1.10
Wi-Fi Certified according 802.11abgn (Rel.7.9.4)
Standards and certifications
EN 55022; EN 55024 + EN 55024/A1; EN61000-3-2; EN 61000-3-3; EN 61000-4-4; EN 60950-1; EN 300 328; EN 301 489-17; EN 301 489-1; EN 301 893
Hardware - modular expansionsIP address ISDN B/D channel license
Free of charge license for IP address transmission in ISDN D or B channel for IPSec connections; registering under www.bintec-elmeg.com required.
IPv6IPv4/ IPv6 Dual Stack
Parallel mode IPv4/ IPv6 supported
DHCP Server and Client
Neighbor Discovery Protocol: Router Discovery, Prefix Discovery, Parameter Discovery, Address Resolution, Static configuration of neighbors, IPv6 Router AAdvertisment Option for DNS Configuration (trough ND)
Unique Local IPv6 Unicast Addresses
IPv6 Stateless address auto-configuration (SLAAC), Manual address configuration, General-prefix support for address configuraion (user and prefix delegation DHCPv6), Duplicate Address Detection
ICMPv6 (router & host)
Destination Unreachable, Packet too big, Time exceeded, Echo Request
Multicast for IPv6
Firewall via IPv6
IPSec for IPv6
VDSL2 ITU G.993.2
VDSL Profile 8a, 8b, 8c, 8d, 12a, 12b, 17a, 30a
Compatibel to VDSL2 connection of Deutsche Telekom
VDSL2 Vectoring ITU G.993.5
Compatible to ADSL/ADSL2/ADSL2+ over ISDN, Annex B
ADSL over ISDN (ITU G.992.1 Annex B, ISDN - compatible to U-R2 connection of Deutsche Telekom, G.Lite (ITU G.922.2)
Support of Dying Gasp
Support of layer 1 protocol AAL5, PVCs, RFC 1483
Support of up to 7 virtual channels (VC)
Support of OAM F4/F5 line monitoring
Support of ATM traffic management (COS - CBR, VBR, UBR)
Wireless LANShort guard interval (802.11n)
On/off switchable; increase of throughput by reduction of the guard intervals from 800ns to 400ns
Advanced 11n performance features
Beamforming, MRC (Maximum Ratio Combining), Block-Acknowledge
RTS/CTS threshold adjustable
20/40 MHz (bundling of two adjoining 20 MHz channels to one 40 MHz channel)
Automatic fallback or fixed transmission rate selectable
Number of spatial streams (802.11n)
1 or 2
Depending on the complexity of configuration up to 8 service sets per radio module, with virtual access points and own MAC address per SSID.
Applicable as Access-Point/Bridge-Link Master or as Bridge-Link Client (available in upcoming release)
802.11n (Mimo 2x2); 802.11b; 802.11g; 802.11a; 802.11h
Frequency bands 2.4 GHz indoor/outdoor (EU)
2.4 GHz Indoor/Outdoor (2412-2472 MHz) max. 100 mW EiRP. The permitted transmission power may vary in countries outside the EC.
Frequency bands 5 GHz indoor (EU)
5 GHz indoor (5150-5350 MHz) max. 200 mW EiRP allowed (Germany). The permitted transmission power may vary in other countries.
Frequency bands 5 GHz outdoor (EU)
5 GHz outdoor (5470-5725 MHz) max. 200 mW EiRP allowed (Germany). The permitted transmission power may vary in other countries.
WLAN Accesspoint operation
2.4 GHz operation: 802.11b only; 802.11g only, 802.11b/g/n mixed; 802.11b/g/n mixed long; 802.11b/g/b mixed short; 802.11b/g/n; 802.11g/n; 802.11n only; 5 GHz Operation: 802.11a only; 802.11a/n; 802.11n only
Automatic Rate Selection (ARS)
Automatic usage of the optimized data rate
Data rates for 802.11b,g (2.4 GHz)
11, 5.5, 2 und 1 Mbps (DSSS modulation); 54, 48, 36, 24, 18, 12, 9 and 6 Mbps (OFDM modulation)
Data rates for 802.11a,h (5 GHz)
54, 48, 36, 24, 18, 12, 9 and 6 Mbps (OFDM modulation)
Data rates for 802.11n (2.4 / 5 GHz)
MCS0-15 enables physical rates up to 150 Mbps at 20 MHz channels bandwidth, 2 streams, short guard interval; MCS0-15 enables physical data rates up to 300 Mbps at 40 MHz channels bandwidth, 2 streams, short guard interval
WLAN Electric CharacteristicsTX power @ 2,4 GHz 802.11n 40 MHz
MCS0/8 19 dBm; MCS1/9 19 dBm; MCS2/10 19 dBm; MCS3/11 19 dBm; MCS4/12 19 dBm; MCS5/13 19 dBm; MCS6/14 19 dBm; MCS7/15 19 dBm
Receiver Sensitivity @ 2.4 GHz 802.11n 20 MHz
MCS0 -95 dBm; MCS1 -94 dBm; MCS2 -92 dBm; MCS3 -88 dBm; MCS4 -85 dBm; MCS5 -81 dBm; MCS6 -80 dBm; MCS7 -78dBm; MCS8 -95 dBm; MCS9 -94 dBm; MCS10 -91 dBm; MCS11 -87 dBm; MCS12 -84 dBm; MCS13 -81 dBm; MCS14 -79 dBm; MCS15 -77 dBm
TX power @ 5 GHz 801.11a/h
6 Mbps 19 dBm;9 Mbps 19 dBm; 12 Mbps 19 dBm; 18 Mbps 19 dBm; 24 Mbps 19 dBm; 36 Mbps 19 dBm; 48 Mbps 19 dBm; 54 Mbps 19 dBm
TX power @ 5 GHz 802.11n 20 MHz
MCS0/8 23 dBm; MCS1/9 23 dBm; MCS2/10 22 dBm; MCS3/11 21 dBm; MCS4/12 20 dBm; MCS5/13 19 dBm; MCS6/14 18 dBm; MCS7/15 18 dBm
TX power @ 5 GHz 802.11n 40 MHz
MCS0/8 19 dBm; MCS1/9 19 dBm; MCS2/10 19 dBm; MCS3/11 19 dBm; MCS4/12 19 dBm; MCS5/13 18 dBm; MCS6/14 17 dBm; MCS7/15 17 dBm
Receiver Sensitivity @ 2.4 GHz 802.11b/g
1 Mbps -92 dBm; 2 Mbps -92 dBm; 5,5 Mbps -92 dBm; 11 Mbps -92 dBm; 6 Mbps -95 dBm;9 Mbps -95 dBm; 12 Mbps -94 dBm; 18 Mbps -92 dBm; 24 Mbps -90 dBm; 36 Mbps -85 dBm; 48 Mbps -83 dBm; 54 Mbps -80 dBm
TX power @ 2,4 GHz 802.11n 20 MHz
MCS0/8 19 dBm; MCS1/9 19 dBm; MCS2/10 19 dBm; MCS3/11 19 dBm; MCS4/12 19 dBm; MCS5/13 19 dBm; MCS6/14 19 dBm; MCS7/15 19 dBm
TX power @ 2,4 GHz 801.11b/g
1 Mbps 19 dBm; 2 Mbps 19 dBm; 5,5 Mbps 19 dBm; 11 Mbps 19 dBm; 6 Mbps 19 dBm;9 Mbps 19 dBm; 12 Mbps 19 dBm; 18 Mbps 19 dBm; 24 Mbps 19 dBm; 36 Mbps 19 dBm; 48 Mbps 19 dBm; 54 Mbps 19 dBm
Receiver Sensitivity @ 5 GHz 802.11a/h
6 Mbps -95 dBm;9 Mbps -94dBm; 12 Mbps -93 dBm; 18 Mbps -90 dBm; 24 Mbps -88 dBm; 36 Mbps -84 dBm; 48 Mbps -82 dBm; 54 Mbps -81 dBm
Receiver Sensitivity @ 5 GHz 802.11n 40 MHz
MCS0 -91 dBm; MCS1 -89 dBm; MCS2 -87 dBm; MCS3 -84 dBm; MCS4 -81 dBm; MCS5 -78 dBm; MCS6 -76 dBm; MCS7 -74 dBm; MCS8 -90 dBm; MCS9 -89 dBm; MCS10 -87 dBm; MCS11 -83 dBm; MCS12 -80 dBm; MCS13 -77 dBm; MCS14 -75 dBm; MCS15 -73 dBm
Receiver Sensitivity @ 2.4 GHz 802.11n 40 MHz
MCS0 -92 dBm; MCS1 -91 dBm; MCS2 -89 dBm; MCS3 -86 dBm; MCS4 -82 dBm; MCS5 -79 dBm; MCS6 -77 dBm; MCS7 -75 dBm; MCS8 -91 dBm; MCS9 -91 dBm; MCS10 -89 dBm; MCS11 -85 dBm; MCS12 -82 dBm; MCS13 -78 dBm; MCS14 -77 dBm; MCS15 -74 dBm
Receiver Sensitivity @ 5 GHz 802.11n 20 MHz
MCS0 -96 dBm; MCS1 -93 dBm; MCS2 -91 dBm; MCS3 -88 dBm; MCS4 -85 dBm; MCS5 -81 dBm; MCS6 -79 dBm; MCS7 -77 dBm; MCS8 -94 dBm; MCS9 -92 dBm; MCS10 -90 dBm; MCS11 -87 dBm; MCS12 -84 dBm; MCS13 -80 dBm; MCS14 -78 dBm; MCS15 -76 dBm
CAPI 2.0 with CAPI user concept (password for CAPI use)
Automatic recognition and configuration of ISDN protocols
B channel protocols
Excellent interoperability with other manufacturers (Raw HDLC, CISCO HDLC, X.75)
ISDN leased lines
Supported leased lines: D64S, D64S2, TS02, D64S2Y
X.31 over CAPI
Support for various connection paths: X.31/A for ISDN D-channel, X.31/A+B for ISDN B-channel, X.25 within ISDN B-channel (also leased lines)
Bit rate adaption
V.110 (1,200 up to 38,400 bps), V.120 up to 57,600 kbps (HSCSD) for connection to GSM subscribers
Euro-ISDN (Point-to-mulitpoint/Point-to-point), 1TR6 and other national ISDN protocols
DES (64 Bit), 3DES (192 Bit), AES (128,192,256 Bit), CAST (128 Bit), Blowfish (128-448 Bit), Twofish (256 Bit); MD-5, SHA-1,SHA-2 (256,384,512), RipeMD160, Tiger192 Hashes
IPSec Deffie-Hellman Groups
1 (768 Bit), 2 (1024 Bit), 5 (1536 Bit), 14 (2048 Bit), 15 (3072 Bit), 16 (4096 Bit)
Number of VPN tunnels
Inclusive 5 active VPN tunnels with the protocols IPSec, PPTP, L2TP and GRE v.0 (also in combination possible). Optional router extension up to 30 simultaneous utilisable VPN tunnel via license.
Point to Point Tunneling Protocol for establishing fo Virtual Privat Networks, inclusive strong encryption methods with 128 Bit (MPPE) up to 168 Bit (DES/3DES, Blowfish)
Generic Routing Encapsulation V.0 according RFC 2784 for common encapsulation
Layer 2 tunnelling protocol inclusive PPP user authentication
Internet Protocol Security establishing of VPN connections
IPSec hardware acceleration
Integrated hardware acceleration for IPSec encryption algorithms DES, 3DES, AES
IPSec key exchange via preshared keys or certificates. Support of IKEv1, IKEv2 Initiator Mode, IKEv2 Responder Mode
IPSec IKE Config Mode
IKE Config Mode server enables dynamic assignment of IP addresses from the address pool of the company. IKE Config Mode client enables the router, to get assigned dynamically an IP address.
IPSec IKE XAUTH (Client/Server)
Internet Key Exchange protocol Extended Authenticaion client for login to XAUTH server and XAUTH server for loging of XAUTH clients
IPSec IKE XAUTH (Client/Server)
Inclusive the forwarding to a RADIUS-OTP (One Time Password) server (supported OTP solutions see www.bintec-elmeg.com).
Support of NAT-Traversal (Nat-T) for the application at VPN lines with NAT
IPSec IPComp data compression for higher data throughput via LZS
IPSec certificates (PKI)
Support of X.509 multi-level certificates compatible to Micrososft and Open SSL CA server; upload of PKCS#7/8/10/12 files via TFTP, HTTP, HTTP, LDAP, file upload and manual via FCI
Certificates management via SCEP (Simple Certificate Enrollment Protocol)
IPSec Certificate Revocation Lists (CRL)
Support of remote CRLs on a server via LDAP or local CRLs
IPSec Dead Peer Detection (DPD)
Continuous control of IPSec connection
IPSec dynamic IP via ISDN
Transmission of dynamic IP address in ISDN D or B channel; free-of-charge licence necessary
IPSec dynamic DNS
Enables the registering of dynamic IP addresses by a dynamic DNS provider for establishing a IPSec connection.
Authentication of IPSec connections at a RADIUS server. Additionally the IPSec peers, which were configured on a RADIUS server, can be loaded into the gateway (RADIUS dialout).
IPSec Multi User
Enables the Dial-in of several IPSec clients via a single IPSec peer configuration entry
The possibility to operate Quality of Service (traffic shaping) inside of an IPSec tunnel
By activating of NAT on an IPSec connection it is possible, to implement several remote locations with identical local IP addess networks in different IP nets for the VPN connection
Number of IPSec tunnels
Inclusive 5 active IPSec tunnels (expandable to 30 tunnels)
WEP64 (40 Bit key), WEP128 (104 Bit key), WPA Personal, WPA Enterprise, WPA2 Personal, WPA2 Enterprise
Inter Cell Repeating
Inter traffic blocking for public hot spot (PHS) applications for preventing of communication radio client to radio client in a single radio cell.
IEEE802.11i Authentisierung und Verschlüsselung
802.1x/EAP-MD5, 802.1x/EAP-TLS, 802.1x/EAP-TTLS, 802.1x/EAP-PEAP, key management, PSK/TKIP encryption, AES encryption, 802.1x/EAP
Access Control List (ACL)
MAC address filter for WLAN clients
Network segmentation on layer 2 possible, one VLAN ID per SSID. Static VLAN configuration according to IEEE 802.1q; supports up to 256 VLANs.
Symmetric Network and Port Address Translation (NAT/PAT) with randomly generated ports inclusive Multi NAT (1:1 translation of whole networks)
Policy based NAT/PAT
Network and Port Address Translation via different criteria like IP protocols, source/destination IP Address, source/destination port
Policy based NAT/PAT
For incoming and outgoing connections and for each interface variable configurable
Stateful Inspection Firewall
Packet filtering depending on the direction with controling and interpretation of each single connection status
Filtering of IP packets according to different criteria like IP protocols, source/destination IP address, source/destination port, TOS/DSCP, layer 2 priority for each interface variable configurable
Support of Internet Group Management Protocol (IGMP v1, v2, v3) for the simultaneous distribution of IP packets to several stations
Multicast inside IPSec tunnel
Enables the transmission of multicast packets via an IPSec tunnel
Multicast IGMP Proxy
For easy forwarding of multicast packets via dedicated interfaces
Support of RIPv1 and RIPv2, separated configurable for each interface
Triggerd RIP updates according RFC 2091 and 2453, Poisened Rerverse for a better distribution of the routes; furthermore the possibility to define RIP filters for each interface.
Policy based Routing
Extended routing (Policy Based Routing) depending of diffent criteria like IP protocols (Layer4), source/destination IP address, source/destination port, TOS/DSCP, source/destination interface and destination interface status
Point-to-Point Protocol over Ethernet (Client and Server) for establisching of PPP connections via Ethernet/DSL (RFC 2516)
Enables the forwarding of DNS requests of free configurable domains to assigned DNS server.
Enables the registering of dynamic assigned IP addresses at adynamic DNS provider, e.g. for establishing of VPN connections
DNS client, DNS server, DNS relay and DNS proxy
Enables the easy routing of IP via ATM
DHCP Client, Server, Proxy and Relay for siplified TCP/IP configuration
Packet size controling
Adaption of PMTU or automatic packet size controling via fragmentation
Point to Point Protocol over ATM for establishing of PPP connections via ATM/DSL
Multilink extension MLPPPoE for bundeling several PPPoE connections (only if both sides support MLPPPoE)
Support of Point to Point Protocol (PPP) for establishing of standard PPP connections, inclusive the Multilink extension MLPPP for the bundeling of several connections
bintec RSxx3 Series
- xDSL Firmware
- Release 10.2. Rev. 5
- Release 10.2. Rev. 4 Patch 1
- Release 10.2. Rev. 3
- Release 10.2. Rev. 2 Patch 2
- Readme Release 10.2.2. Patch 2 - German
- Readme Release 10.2.2. Patch 2 - English
- Release Notes Release 10.2.2 - German
- Release Notes Release 10.2.2 - English
- RS353jxx - System Software Version 10.2. Rev. 2 Patch 2 - Annex J
- RS353axx - System Software Version 10.2. Rev. 2 Patch 2 - Annex A
- RS353axx - System Software Version 10.2. Rev. 2 Patch 2 - without DSL
- Release 10.2. Rev. 2
- Release 10.1. Rev. 27 Patch 6
- Readme Release 10.1.27 Patch 6 - German/English
- Release Notes Release 10.1.27 - German
- Release Notes Release 10.1.27 - English
- RS353jxx - System Software Version 10.1. Rev. 27 Patch 6 - Annex J
- RS353axx - System Software Version 10.1. Rev. 27 Patch 6 - Annex A
- RS353axx - System Software Version 10.1. Rev. 27 Patch 6 - without DSL
- Release 10.1. Rev. 27 Patch 5
- Readme Release 10.1.27. Patch 5 - German/English
- Release Notes Release 10.1.27 Patch 5 - German
- Release Notes Release 10.1.27 - English
- RS353jxx - System Software Version 10.1. Rev. 27 Patch 5 - Annex J
- RS353axx - System Software Version 10.1. Rev. 27 Patch 5 - Annex A
- RS353jxx, RS353axx, RS123xx - System Software Version 10.1. Rev. 27 Patch 5 - without DSL
- Release 10.1. Rev. 27
- Release 10.1. Rev. 21 Patch 8
- Readme Release 10.1.21 Patch 8 - German/English
- Readme Release 10.1.21 Patch 21 - German
- Release Notes Release 10.1.21 - English
- RS353jxx - System Software Version 10.1. Rev. 21 Patch 8 - Annex J
- RS353axx - System Software Version 10.1. Rev. 21 Patch 8 - Annex A
- RS353jxx, RS353axx, RS123xx - System Software Version 10.1. Rev. 21 Patch 8 - without DSL
- Release 10.1. Rev. 21
- Release 10.1. Rev. 9 Patch 8