Spanish EnglishGerman

be.IP plus V2

THE Plus in Communication and Flexibility

  • PABX for 20 up to 60 users
  • Supports analogue, ISDN and IP/IP DECT end devices
  • 4 additional analogue interfaces
  • Opt. enhancment of user, Voicemail, VPN and WLAN Management
  • Flipable ISDN Interface by Optional Adapter
  • LANCAPI supported
  • Smooth migration - operation mode as media gateway

be.IP plus V2

The be.IP plus V2 is the ultimate ALL-IP communications solution for businesses. It combines a scalable business telephone system with powerful routing, VPN, and wireless networking features.

IP telephone system and media gateway with integrated VDSL VPN router and 11n wireless

Two devices in one system - the be.IP plus V2 can be used just as the be.IP for easy migration of existing ISDN systems. The plus version allows for a subsequent upgrade to a full-scale communications hub via software activation.

Suitable for both point to multipoint and point to point connections at small and mid-sized businesses with multiple retail locations, home office workers, and branch offices.

Product description

The be.IP plus V2 is no mere telephone system, but rather a convergent communications solution for ALL-IP services such as DeutschlandLAN IP Start and DeutschlandLAN IP Voice Data from Deutsche Telekom. These flexible systems unite all the convenient features of a telephone system with the benefits of a powerful VPN router, ensuring secure voice and data communications. The combined VDSL2 and ADSL2+ modem provides a reliable and future-proof internet connection with vectoring support for download speeds of up to 100 Mbps.

The professional wireless LAN implementation forms the basis of a number of applications such as integrating smartphones or wireless LAN telephones into the company network. The integrated access point operates on either the 2.4- or 5-GHz frequency band, enabling raw data rates of up to 300 Mbps.

The be.IP family of systems can be individually tailored to meet your communications needs. Whether you require a LAN, additional WAN interfaces, or a perimeter network for on-site servers (web, e-mail, etc.) - the five available Gigabit Ethernet ports offer maximum flexibility for company network design and implementation.

Two internal ISDN interfaces (S0) and four analog lines (a/b) also allow for the continued use of existing telephones, fax machines, or intercom devices over your VoIP telephone service.

Easy migration for ISDN telephone systems

When configured as a media gateway, the two integrated ISDN interfaces allow you to continue using your conventional ISDN systems and accompanying terminal devices such as phones and fax machines over your VOIP service. Business users can thus take advantage of all the benefits of IP telephony while continuing to use their existing telephone equipment. That`s an unbeatable argument if you seek to maintain the value of your investments.

Airtight security

The integrated VPN business router in the be.IP plus V2 provides impressive and comprehensive security features for voice and data communications. The five available VPN channels can be used concurrently to ensure reliable voice and data transmissions, making it easy to establish links to branch locations, home offices, and travelling employees. The integrated IPSec implementation lets you use pre-shared keys as well as digital certificates as recommended by Germany`s Federal Office for Information Security. This allows you to take advantage of a public key infrastructure for maximum security. The flexible and customizable stateful inspection firewall uses dynamic packet filtering to provide additional protection for the network against attacks launched either over the internet or from internal networks.

Professional management

The be.IP plus V2 is configured over a web-based graphical user interface. Integrated assistants and user profiles allow for flexible configurations that fulfill each customer`s unique requirements. Administrators can also manage the devices locally or remotely using configurable telnet, SSH, or GSM dial-in connections.

The bintec DIME Manager gives administrators a free software tool that can manage up to 50 devices.

Convenient WLAN Controller

In addition, be.IP plus also offers the integrated WLAN Controller, which allows professional management of wireless infrastructures. The WLAN Controller lets you configure and monitor small WLAN networks, optionally with up to 5 additional access points. No matter whether you need frequency management with automatic channel selection, load balancing across several access points, support for virtual LANs, or virtual wireless network administration (multi-SSID) for easy configuration and secure separation of guest and company networks - you`ll have all these advanced features at your fingertips with the WLAN Controller. The software continuously monitors the entire wireless network, notifying administrators of any malfunctions or security threats.

be.IP plus License package

Extension license for be.IP plus V2. For additional 5 VPN tunnel, 2 Accesspoints (WLAN controller), 20 S IP Clients, 20 Terminals, 20 VoiceMail boxes.

Sophisticated design

The fanless housing ensures long-term reliability for mission-critical applications. You can operate the be.IP plus V2 on a desktop, mount it to a wall, or integrate it into a 19” server rack using the optional accesorie 19” rackmount bracket. The system is able to adapt to the requirements of any application.

100% ready for the future

With its numerous setup assistants, the be.IP plus V2 is easy to integrate into existing network infrastructures and enables migration to the ALL-IP network of the future. The integrated VDSL2 modem supports the standards used in Germany and most other European countries. This state-of-the-art hardware has been designed so that additional features can easily be added via future software updates. In addition, the be.IP plus V2 also supports the next-generation network protocol IPv6. With its ability to easily migrate existing infrastructures to ALL-IP networks, its suitability for use on the SIP trunk, and support for VDSL vectoring technology, the be.IP plus V2 is a sound investment for sustainable professional IP and telecommunications applications.

Bandwidth reservation
Dynamic bandwidth reservation, assigning guaranteed and maximum bandwidths
Priority queuing of packets using the DSCP/TOS field.
Layer2/3 tagging
Mapping 802.1p layer 2 priority information to layer 3 Diffserv attributes.
Policy-based traffic shaping
Dynamic bandwidth management using IP traffic shaping
TCP download rate control
Reserves bandwidth for TCP connections.
Load Balancing
Static and dynamic load balancing to several WAN connections on IP layer
Bandwidth on Demand: dynamic bandwidth to suit data traffic load
Ethernet cable LAN
1x Ethernet cable, (RJ45-RJ45), 3m, yellow
Ethernet cable WAN
1x Ethernet cable WAN (RJ45-RJ45), 3m, blue
VDSL cable
1x VDSL cable (TAE-F-RJ45), gray
FXS cable
2x FXS cable (TAE-U-socket-RJ11)
WIFI Antennas
2x WIFI antennas (dual band, R-SMA), white
Power Supply
1x External power supply, Input: 100V - 240V AC, with high efficient switching power supply; follows EuP Directive 2008/28/EC
Setup manual, safety instructions
Support of layer 2 bridging with the possibility of separation of network segment via the configuration of bridge groups
Proxy ARP
Enables the router to answer ARP requests for hosts, which are accessible via the router. That enables the remote clients to use an IP address from the local net.
Support of up to 256 VLAN (Virtual LAN) for segmentation of the network in independent virtual segments (workgroups)
Interfaces Monitoring
Statistics on all physical and logical interfaces (ETH0, ETH1, ...), output over the Web-based configuration interface (http/https).
IPSec Monitoring
Display of IPSec tunnel and IPSec statistic; output via web-based configuration user interface (http/https)
IP Accounting
Detailed IP accounting, source, destination, port, interface and packet/bytes counter, transmission also via syslog protocol to syslog server
WLAN Monitoring
Display for each link: MAC address, IP address, TX packets, RX packets, signal strength for all receiver antennas, signal-to-noise ratio, data rate; output via web-based configuration user interface (http/https).
WLAN monitoring
Detailed display for radio, VSS, WDS links, bridge links, client links.
E-Mail alert
Automatic e-mail notification for specified actions or statuses.
External Systemlogging
Syslog, multiple syslog servers can each be configured with a separate syslog level.
SNMP traps
SNMP traps (v1, v2, v3) configurable

Configuration Interface
Integrated web server for web-based configuration via HTTP or HTTPS (supporting self created certificates). This user interface is by most of bintec elmeg GmbH products identical.
SNMP Configuration
Complete Management according MIB-II, MIB 802.11, Enterprise-MIB
SNMP (v1, v2, v3), USM model, VACM views, SNMP traps (v1, v2, v3) configurable, SNMP IP access list configurable
Device discovery function
Device discovery via SNMP multicast.
SNMP Management System
Support of Nagios, CACTI, MRTG etc.
SSH login
Supports SSH V1.5 and SSH V2.0 for secure connections of terminal applications
Remote maintenance
Remote maintenance via telnet, SSL, SSH, HTTP, HTTPS and SNMP (V1,V2,V3)
Software update
Software updates are free of charge; update via local files, HTTP, TFTP or via direct access to the bintec elmeg web server
Configuration export and import
Load and save configurations, optional encrypted; optional automatic control via scheduler
Configurable scheduler
Controlling actions using both scheduling and event-driven criteria, for instance Reboot Device, Activate/Deactivate Interface, Trigger Software Update, and Configuration Backup.
Management: Supported management systems
bintec WLAN Controller, DIME Manager
Central check of access authorization at one or several RADIUS server, RADIUS (PPP, IPSec inclusive X-Auth and login authentication, WPA Enterprise WLAN 802.1x)
RADIUS dialout
On a RADIUS server configured PPP und IPSec connection can be loaded into the gateway (RADIUS dialout).
Automatic Time Settings
Time zone profiles are configurable. That enables an automatic change from summer to winter time.
Time synchronization
The device system time can be obtained via ISDN and from a SNTP server (up to 3 time server configurable). The obtained time can also be transmitted per SNTP to SNTP clients.
On The Fly configuration
No reboot after reconfiguration required
VDSL2 nach ITU G993.2, G993.5 vectoring, ADSL2+ / ADSL2 / ADSL (compatibl to U-R2 & 1TR112 Deutschen Telekom), Annex B / J, G.Lite (ITU G.922.2), Vectoring support, VDSL Up- and Downstream up to 100 MBit/s
Ethernet WAN / DMZ
1x 10/100/1000 Mbps Ethernet Twisted Pair, autosensing, Auto MDI/MDI-X, up to 4 ports can be switches as additional WAN ports incl. load balancing, all Ethernet ports can be configured as LAN or WAN.
4x 10/100/1000 Mbps Ethernet Twisted Pair, autosensing, Auto MDI/MDI-X, up to 3 ports can be switches as additional WAN ports incl. load balancing, all Ethernet ports can be configured as LAN or WAN.
ISDN S0 ports
2x ports for internal operation: internal for connecting S0 standard or system telephones, (external: PtP, PtMP) / PABX in MGW mode
Analogue internal ports (FXS)
4x FXS interfaces for phone and faxcimile devices. 4 RJ12 plugs for direkt terminal connection
CAPI 2.0 with CAPI user concept (password requested for CAPI use). Available from Release 10.1.7
ISDN TE-Interface
To switch the internal ISDN Interfaces to external (NT to TE) the be.IP plus can be extended with an ISDN TE-Adapter (Art.Nr. 5520000161) This option works with be.IP plus SN BE2CAD016090001 or higher.
1x radio module IEEE 802.11abgn Mimo 2x2 for 2.4 or 5 GHz
External WiFi Antenna
2x external antenna with Omni characteristic for each radio module, RSMA socket, approx. 1,5dBm gain
Plastic housing, white with red frame
327 x 193 x 44 mm (B x H x T)
Protection Class
Wall mounting, Destkop, 19" -Rack
Wall mounting integrated in housing, Desktop, 19"-brackets (included in scope of delivery)
Power Supply
External power supply, Input: 100V - 240V AC, with high efficient switching power supply; follows EuP Directive 2008/28/EC
Power consumption
Idle: 14 W, maximum: 29 W
Fanless design therefor high MTBF
9 LEDs to display the operational states: Power, Status, Service, DSL, Phone, BRI1, BRI2, WiFi; Memory
Reset Taster / Factory Settings
Restart or reset to factory state possible
Function Button
Additional Trigger-Element for the Event Scheduler
Realtime clock
System time persists even at power failure for some hours.
Audio memory
Internal memory for voicemail system, announcement and onhold musik
Standards and certifications
R&TTE Directive 1999/5/EC (EN 55022; EN 555024); Low Voltage Directive 2006/95/EC (EN60950-1); Ecodesign/ERP Directive 2009/125/E
Environmental conditions
Desk, wall or rack mountable, operating temperature: : +5° C to +40° C, Stocking: -20°C to +70°C, air humidity: max. 85 % non condensing, dry and dust free rooms
Multiserver CAPI
A computer can use several CAPI server simultaneously.
Multisite CAPI
Several computer can use the same BRI port
Access Control
Prevention by user passwort concept
ISDN server virtualising
Unlimited usage on virtual computers
Fax profile
Fax group 3
Number of parallel Voice / Data channels
4 Voice / Data channels
Number of parallel fax channels
1 fax channel
Maximum data rate
14,400 Baud
Fax standard
Fax protocol T.30
Protocols for fax data transmission
Fax data transmission according V.21, V.27, V.29, V.17
CAPI controller features
CAPI possibilities: Internal controller, supplementary services, DTMF (MFV), HOLD, ECT, 3PTY, CF, CD, MWI
B channel layer 1 protocols
64 kbps HDLC, 64 kbps bit transparent, V.110, T.30 fax G3, 56 kbps bit transparent
B channel layer 2 protocols
ISO 7776 (X.75 SLP), transparent, LAPD D-CH X.25 (SAPI 16), T.30 fax G3, PPP, V.120 asyn., V.120 Bit transparent, LAPD free SAPI
B channel layer 3 protocols
Transparent, T70/90NL, ISO 8208 (X.25 DTE-DTE), X25DCE, T.30 fax G3, T.30 fax G3 extended
Fax data compression standards
T.4 (MH-, MR compression), T.6 (MMR compression)
Direct access from CAPI applications to SIP-Interface for Voice, Data and Fax (T.38) This Feature is only available in PBX Mode
Web browser access
Configuration, SW update, system status, readout of important system data, tracing, fault diagnosis
VPN / IPSec Tunnel
Max. 5 (optional 10)
WLAN Controller
Internal AP and max. 3 external APs, optional 6
Media interfaces TDM/IP
5 DSP channels (G.711) from which 5 DSP are with compression (G.729, G.722), +4 with no compression (SftCoder)
IP phones /IP systels (PBX)
Max. 20 IP system telephones (optional 40)
Terminals (PBX)
Max. 20 (optional 40)
VoIP/SIP providers (PBX)
Max. 25 SIP providers
External SIP channels (PBX)
No restrictions
Voice mailboxes (PBX)
Max. 20 (optional 40)
Door terminals (PBX)
Max. 4 door terminals
Calendars/switching points (PBX)
Max. 20 calendars can be set for all types per max. 10 switching points.
External SIP channels (MGW)
No restriction
VoIP/SIP provider (MGW)
no restriction
Terminals (MGW)
no restricition
PABX menu
Access to system functions of system telephone: phone book, follow me, direct call, editing of public holidays in calendars
Alphanumeric central phonebook
1000 entries in phonebook, individual authorisation for phonebook access, import/export possibility, name display on phonebook
Analogue ports - internal
To connect analogue terminals: MFC dialling method, adjustable flash times, setting as: phone/fax/modem/answ.machine/combination device, name display on phonebook for (CNIP/CNIR), transfer of phone numbers to internal analogue ports (CLIP, CLIP off Hook)
Internal call waiting
Call waiting is signalled by a call waiting tone on FXS ports. Possible procedures: ignore call waiting (timeout after 30 secs), accept directly, accept through hold for enquiry, reject
Call waiting protection
The call waiting protection is configurable per FXS extension (Ext.) as well as via Class of Service (CoS); the ext. is implemented in the terminal for ISDN extensions.
Do not disturb feature for internal ports (1)
The do not disturb feature (at rest) for FXS ports is configurable for a) just internal calls, b) just external calls, or c) internal and external calls;
Do not disturb feature for internal ports (2)
A special dial tone signals that the do not disturb feature is active; it shall however be possible to accept calls whilst in do not disturb mode.
Call assignments
Team and door terminal lists can be automatically switched on via programmable weekly calendars. It shall be possible for an authorised extension to manually switch on
Set up call forwarding remotely
Call forwarding can be remotely carried out in the system.
Call forwarding (CF) immediately/after a period of time/when busy (2)
Set up of call forwarding for internal extensions via user portal as well. The call forwarding set up is also possible with standard telephones via the telephone code procedure; this can also be done externally via the 2nd B channel.
Call forwarding during a call (CD - call deflection)
Automatic call deflection to PtMP connector if an incoming external call is to be forwarded externally.
Call forwarding during a call (partial rerouting) for PtP
Automatic execution if a internal extension has set up an external call forwarding. In the event of failure the call forwarding is done via the 2nd B channel.
Release (if dialled incorrectly, or if no answer)
Release to a configurable destination in the event of: incomplete DDI (after a period of time); if dialled incorrectly and if all team extensions are logged out etc.
Call assignment
External calls can be flexibly assigned to extensions, teams or to voice applications as well.
Exchange access right
The exchange access right can be set at different levels per user: internal, incoming, local, national, unlimited.
Switchable exchange access right
The exchange access right can be controlled via the calendars through appropriate authorisation in the CoS
Automatic outside line
The automatic outside line is configurable per user; an internal number can therefore be dialled by pressing *
Global exchange access
The dialling code (typically 0) can be programmed freely.
Automatic route selection (LCR) is a dial control with a telephone number-dependent bundle selection. ARS is configurable per extension via the CoS.
Authority matrix (Class of Service)
The CoS contains a list of functions for the user; the CoS can be switched via the calendars/manually.
Bundle formation/division
Authorisation to assign a bundle is done via the CoS.
Specified bundle assignment
The bundle assignment can be done via the code on standard terminals or via the bundle key on SysTel.
Call Through (2)
Cheap tariffs, e.g. when dialling abroad, can therefore be used. When the ARS is switched on, routing is also possible via internal analogue GSM gateways.
Boss/secretary function
Functional linking of 2 system telephones - routing of calls via call function
CLIP no screening for point-to-points
Sending of call number that does not belong to connector, e.g.: as central call number for call centre. Application to the provider necessary
CLIPO (Calling Line Identification Presentation Override)
Transmission of suppressed numbers to special connectors (e.g. police)
Data protection for analogue extensions
The data protection option prevents call waiting for analogue faxes, modems and door intercoms.
Implemented through clock component, clock software, time servers etc. The clock can be adjusted via GUI, synchronisation with ISDN network time is possible. Automatic changeover to summer/winter time
Diagnostic function
Fault logbook and diagnostic history memory in the system
Direct call
Automatic call setup after x secs to a preset destination after the receiver is lifted without dialling; can be programmed per user, special dialling tone for active direct calls; adjustable reaction time of 0 - 39 secs can be adjusted centrally
Announcement/announcement block
Announcement to system telephone with notification tone for both the calling party and the called party; can be set per extension
Advanced call assignment for point-to-points
Additional MSNs (exceptional call numbers) that can be configured centrally for all point-to-points. For non-configured call numbers, the call is released to a configurable global default destination.
Fax connection possibility
Connection possibility of a fax to analogue or ISDN internal connectors:
Follow me (1)
Tracing of call diversion of internal extensions via the code procedure; configuration of follow me function externally possible by dialling externally in the PABX (service call number) - protected by PIN2
Follow me (2)
The remote switching authorisation is set centrally.
Charges (1)
Transmission both during (AOC-D) and at the end (AOC-E) of the call in units or currency amounts; operation of pay phones at the internal So bus possible
Charges (2)
Forwarding of charges to internal analogue/digital connectors, charge pulses 12 kHz/16 kHz, charge meter per extension
GSM gateway
GSM gateways can be switched on be.IP plus external ISDN ports. The automatic routing via ARS can be adjusted. The post-dial delay on analogue GSM gateway ports can be configured centrally, the ISDN clock synchronisation can be switched.
Pickup of calls to other extensions: Pickup within a group; group assignment can be programmed per extension.
Pickup specified
Specified pickup by entering the extension call number; this covers all groups
Calendars (PBX Day/Night, CoS, door terminal, teams) (2)
Several different switching times can be selected for each weekday. Exceptions for public holidays can be configured
Changeable codes for important functions
Programmable telephone codes: exchange access, pickup, specified pickup, speeddial number, project number, bundle assignment, open hold for enquiry
Keypad procedures in exchange
Control of performance features in the exchange, authorisation per extension in the CoS
Speeddial number
Access to entries in the phone book via a code combined with the respective entry index (000-999)
Any change between internal and external connections; the respective caller on hold hears MoH.
Save message on SysTel
Signalling via UUS 1
Name display in the call and in the connection
During the call as well as during the connection, the caller"s number is displayed (CLIP). If the call number is entered in the phone book, the corresponding name is displayed.
Name assignment for connectors, terminals and teams
In the configuration, names can be assigned to the individual ports. For internal calls the name is displayed on the terminal. In addition the name is also visible in the PABX menu and in FCI, as well as on the terminal for team calls.
Emergency number storage/emergency telephone/alarm point-to-point (1)
In the be.IP plus, 10 emergency numbers (up to 20 digits) can be set up. The occupied ISDN exchange is then subject to a blockade break if one of the saved emergency numbers is dialled.
Emergency number storage/emergency telephone/alarm point-to-point (2)
The emergency number dial is, provided that all exchange lines (incl. SIP provider) are occupied, always routed via ISDN (VoIP blocked).
Open hold for enquiry - park in system
By using the open hold for enquiry function, the caller is held in the system queue. The call can be transferred to any telephone via the code procedure or with SysTel park keys.
Internal and external room monitoring
Room monitoring via a telephone that has been approved for this and whose receiver has been lifted or whose hands free has been switched on. Room monitoring can also be remotely activated.
Separation of direction
A fixed exchange/bundle assignment can be configured for each user.
Call number plan
Flexible internal call number plan can be programmed in a variable manner from 1 to 4 digits
Call number prefix
The national/international dialling code can be set up centrally.
Call number transmission/suppression
The transmission and suppression of call numbers is implemented in the be.IP plus via (CLIP/CLIR/COLP/COLR)
Ringing AC voltage (frequency)
For all FXS ports, the frequency of the ringing AC voltage can be adjusted centrally between 25/50 Hz.
Day/night operation
Switching to the respective operating status for the enitre system
Display extension status data
The current settings for a particular user can be displayed. Call number (MSN), name, current authorisation class, assigned interfaces, costs
On-hold queue
Callers can be switched to on-hold queues and then retrieved by pressing the correct code.
Music on hold
The MOH to be used for each extension can be configured via Class of Service. Options: no MOH, internal melody 1, internal melody 2, external connector, voice application MOH (external source via jack or WAV file)
The number of calls on-hold for the team can be individually set.
Return call (1)
A return call shall occur: when put on hold for enquiry, when dialling, when busy, if transferred incorrectly; after a period of time (30 secs). Return call from open hold for enquiry
Return call (2)
The time for the return call can be adjusted separately for iUbA, busy and open hold for enquiry.
Dial control (blacklist/whitelist)
Up to 30 16-digit blacklist numbers and up to 60 16-digit whitelist numbers can be set up in the system. Assignment to the various extensions is done via the CoS.
Simplex operation/simplex operation block
Simplex operation is typically only possible with SysTels. By using this function, the called device is switched immediately to hands free mode and the call is accepted. A simplex operation is ended after 2 minutes for security reasons.
Central configuration of (system) telephones via PABX
Installation and administration of important system telephone parameters in the be.IP plus
Team function - General (2)
16 extensions can be put into one team. Divisible call signalling can be configured for each team. Team call assignments are allocated to each team. The switching on of call assignments can either be done manually or automatically.
For a particular team, a release to another team can be configured.
Call assignments
4 call assignments are allocated to each team, these can be switched on either manually or via calendars.
Call forwarding (2)
It can also be set up whether a call forwarding should be done externally in the VST via call deflection/partial rerouting and should be cancelled if the entire team call is successful.
Call list control (SysTels)
If an answering machine within the team accepts the call, the call will remain in the call lists for all telephones.
Automatic call acceptance (with parallel signalling within the team)
Team calls can be accepted with MOH; the team extensions are then called in parallel. Once a team extension accepts the call, the connection is made.
Call signalling
Call signalling can be individually configured for each team: simultaneous, linear, rotating, constructing, parallel after a period of time, uniform call assignment according to average talk time.
Team call signalling to internal/external terminals
The team call signalling can be done to internal team extensions or to external call numbers. The allocation is done in the call assignments, which can be controlled via the calendars.
Team log in/log off
Team extensions can log themselves in and out of the team. This is possible for both individual as well as all teams; if all extensions are logged out then a call is released to the default destination.
Transfer functions
Transfer functions can be configured for each team: busy options, release options, transfer to busy extensions, automatic release immediately/if busy/if no reply.
Door terminals - General (1)
Door terminals can be switched on on internal FXS ports. For each door terminal, 8 internal extensions or 1 external call nr. (chemist"s circuit) are included in the call signalling each time it is rung. Refer to call signalling in the day/night ser
Door terminals - General (2)
Door terminal authorisations (call door terminal/open door) are done via the CoS. The door terminal switching authorisation (day/night) can be configured for each extension via CoS; door intercom calls can be picked up.
Doorbell signalling
The signalling time can be programmed for both internal and external use. The monitoring can be switched on or off.
Door terminal external call monitoring
A timer limits the call duration. Can be configured for each door terminal and doorbell
Door terminal call signalling
The call signalling duration can be adjusted.
Hold for enquiry
Can be freely executed on all internal or external extensions. Possible functions: Disconnect active connection, disconnect connection on hold, redial. The extension on hold shall hear MoH.
Hold for enquiry
Hold for enquiry from an active connection to an internal/external extension. The other extension is held in the system.
Transfer to busy extension
A call can be transferred to a busy extension. At the end of the call the connection is made. Automatic return to the original extension after time has expired.
Exchange to exchange transfer
Following the return of an existing exchange connection to the exchange, both external channels can then be interconnected. Not available for FXO
Transfer without advance notice (blind transfer)
Transfer a call by replacing the receiver from the hold for enquiry.
Transfer with advance notice
Transfer a call by replacing the receiver from the hold for enquiry after notifying the extension
Transfer (ECT)
Transfer of calls in exchange (if LM available). Can be reached via GUI, although external-external ECT is allowed.
Transfer of active call through call waiting
Analogue terminals can transfer the incoming call with R5 etc whilst on the call via the code procedure.
General configuration
The be.IP plus is configured using a Web browser to access the Configuration Interface . Supported browsers: Internet Explorer, vers. 7 or later, Firefox 2 or later, Safari, Chrome
Management via SNMP, SSH
SNMP browser
Integrated in Graphical User Interface
Web configuration
Configuration access is performed locally and remotely over IP: HTTP / HTTPS without a signed certificate.
Telnet access
Telnet (console) login for access to diagnostics results, traces, etc.
DIME Manager support
The be.IP plus can also be configured via the DIME Manager.
Device Discovery Function
Device discovery via SNMP Multicast (DIME Manager)
Remote maintenance over IP
Remote maintenance via Telnet, SSH, HTTP
Export and import configuration
Load and save the configuration; Optionally save encrypted configuration; Optionally runs automatically from the scheduler.
Firmware download
Via IP
Event scheduler
Controlling actions using both scheduling and event-driven criteria, for instance Reboot Device, Activate/Deactivate Interface, Trigger Software Update, and Configuration Backup.
General voice applications
Voice applications are based on WAV files with music, announcements etc. Max. 18 voice applications can be configured as: announcement before query, infobox, wake-up message or MOH.
A WAV file can inform the caller of any changes to opening hours in the form of an announcement/infotext.
Volume control of files
The WAV files can be adjusted by a volume control.
Music on hold
Music on hold (MoH) can be configured based on WAV files.
General compilation of call data (1)
Compilation of records in FLASH with: iinternal extension no., external call number suppressed/shortened/not shortened), date/time, call duration, currency amount, project number, connector type, exchange line no./MSN/DDI index;
General compilation of call data (2)
can be configured for each extension; storage of incoming calls either generally or only by entering a project number.
Output of records
Storage of records per user can be configured (1)
Possible output of call records on V.24 printer. Output of records in currencies standardised by a ratio of 1/1000; the factor and currency text can be configured.
Storage of records per user can be configured (2)
Shortened numbers are indicated with # character. Printout via V.24 can be switched via PABX menu
Call records in memory
2000 records are held in the memory.
Shortened storage of external call numbers.
The storage of shortened call numbers (privacy) is possible.
Mobile extensions - General (1)
Integrated application: parallel signalling of incoming calls to an internal terminal and an external call number (e.g. mobile phone). The assignment can be switched on or off via a code.
Mobile extensions - General (2)
The parallel call is initiated by directly dialling the internal extension. During the external connection, hold for enquiry and call transfer to be.IP plus extensions are both possible via DTMF code procedures.
TAPI - General
TAPI is supported for: TDM and IP system telephones. MS Windows XP, Vista, Win7. Support for 32 bit/64 bit, 1st and 3rd parties via LAN, TAPI authorisation for each extension can be adjusted via Class of Service
TAPI functions (1)
Automatic call acceptance via elmeg system telephones, incoming and outgoing calls, call forwarding, hold for enquiry, brokering, call transfer, three-party conference call, call waiting, charge information, call deflection, pickup of calls
TAPI functions (2)
Signalling of call forwarding number(s), MSN/DDI signalling, cause signalling, specified pickup, park/unpark
Mini call centre - General
Integrated solutions for up to 16 agents ffor small groups that need to communicate both frequently and in a dynamic manner. The administration is done via a separate portal.
Flexible assignment of agents and lines, dynamic customisation depending on call volume, call assignment with idle periods for agents, statistical information on agents and lines
Status information (1)
Different status information is displayed, e.g.: lines and assigned agents, number of agents logged on per line.
Status information (2)
Agents in post-processing, active calls (active connections), calls on hold, number of calls accepted today, number of missed calls today.
Singlecell/multicell via LAN
As DECToIP system used with existing Ethernet interfaces via SIP protocol
be.IP plus license package
The be.IP plus license package includes following enhancements
VPN / IPSec Tunnel
5 --> 10
20 --> 40
SIP clients
20 --> 40
20 --> 40
WLAN Controller
4 --> 6
E-mail messaging
The owner of the voice mailbox can receive new voice messages in an e-mail attachment.
Listen to messages remotely
The administration of the voicebox and listening to messages is possible both from internal and external telephones.
Message waiting indication
The owner of a voicebox is informed of new messages by a MWI, an e-mail, or special ringtones.
PIN protection & configuration
Subscriber access to the voicebox for use and configuration is protected with an individual user PIN. The configuration can also be performed over the user portal.
Storing announcements and messages on the internal USB Flash
Announcements and messages from the voicemail system are stored on the internal USB Flash.
Voice-driven menus
While navigating through the menus of the voicemail system, the user will hear announcements and information about how to use the system.
Multicast inside IPSec tunnel
Enables the transmission of multicast packets via an IPSec tunnel
VLAN Tagging
VLAN tagging on IP interfaces can be configured (value range up to 4096 VLANs)
Multicast IGMP
Support for Internet Group Management Protocol (IGMP V1, V2, V3) for simultaneous distribution of IP packets to multiple stations.
Multicast IGMP proxy
For simple forwarding of multicast packets to dedicated interfaces.
Policy-based routing
Advanced routing (policy-based routing) depending on various criteria such as IP protocols (layer 4), source/destination IP address, source/destination port, TOS/DSCP, source/destination interface and destination interface status.
Switch/Port Separation
Logical separation of ports at the Ethernet switch to connect a system behind a VDSL modem.
SIP secure (TLS), establish secure calls
Media protocols
Debug trace
Recording of all data streams via console and web configuration. Selectable trace formats: text PCAP
Number of paralell connectins
9 x BRI/analogue <-> SIP hybrid connections, independent of codec type
SIP properties
SIP 2.0
RFC 3261 conform. 2327, 2976, 3261, 3262, 3263, 3264, 3311, 3323, 3325, 3428, 3515, 3581, 3608, 3891, 3966, 4028, 3555, 2833, 1035, 2782, 2915, 2617, ...SIP Connect 1.1
Features hybrid connections
Echo cancellation according G.168, Comfort Noise Generation CNG
SIP protocols
Dialling end identifier/shortening via #
The time after which the system begins to dial externally; i.e. after dialling the last digit of a call number. The time can be shortened by entering #.
NTP Client/Server
Automatic update of date/time from time server. Internal time server for connected IP terminals.
System interface, sub-system operation via IP
For the system interface, 2 systems are interconnected via a bidirectional connection - without global performance feature. The sub-system operation represents a single connection from the main system to the sub-system.
Connection to SIP provider
A connection to an SIP provider can be configured by using an individual telephone number or extension.
Connecting standard SIP terminal devices / IP system telephones (1)
Standard SIP telephony over the LAN Telephony over (WAN) SIP provider; general SIP and router settings: SIP RTP port, DSCP value (SIP packets), DSCP value (RTP packets)
Number of simultaneous SIP connections per provider
The number of simultaneous SIP connections to the provider can be configured. System side not limited
Offsite extensions
Offsite extensions can be set up with IP system telephones or SIP telephones.
Bandwidth management with support for multiple locations (1)
Locations can be set up in order to use the bandwidth management. A location is identified with the aid of its fixed IP address or DynDNS address, or by using the interface to which the device is connected.
Bandwidth management with support for multiple locations (2)
The available VoIP bandwidth (upstream and downstream) can then be set up for each location.
Codecs G.711, G.722, G.729, DTMF inband, DTMF outband, SIP INFO,
Codec for, SIP providers, or IP terminals
Various codecs can be defined to influence voice quality and meet the specific requirements of individual providers. Codecs can be sorted according to various criteria and presented according to quality or bandwidth, for instance.
Early media connect
Early media connect connects voice or audio data (e.g.: announcements) before the call was accepted.
Quality of Service
DSCP header / ToS bits configurable
A STUN server is required to provide VoIP devices behind an active NAT with access to the internet. In such cases, the current, public IP address of the connection is determined and utilized to ensure a precise address is available from the outside.
WLAN Access Control List (ACL)
MAC address filter for WLAN clients (Whitelist)
Stateful inspection firewall
Directional packet filtering with monitoring and interpretation of the respective status of the individual connections.
Policy-based NAT/PAT
Network and port address translation using different criteria such as IP protocols, source/destination IP address, source/destination port.
Symmetrical network and port address translation (NAT / PAT) with randomly generated ports including multi-NAT (1:1 translation of the entire network)
Packet filter
Filtering of IP packets based on various criteria such as IP protocols, source/destination IP address, source/destination port, TOS/DSCP, layer-2 priority can be individually configured for each interface
Password Admin
Administrator system access for the Web configuration
Passwords for application portals
Access to the Web configuration of the integrated solutions: mini call center, phone book, call logs
Password for user portal
User access to the Web configuration of the custom settings
PIN protection for voicemail system
Access to the voicemail system is protected by the individual user PINs.
PIN protection for remote access
Remote access to the system is protected with a 6-digit, programmable PIN
Encryption WEP/WP
WEP64 (40 Bit key), WEP128 (104 Bit key), WPA Personal, WPA Enterprise, WPA2 Personal, WPA2 Enterprise
Access Control List (ACL)
MAC address filter for WLAN clients (white list) and dynamic and static blacklist. Black list function requires WLAN Controller
IEEE802.11i authentication and encryption
802.1x/EAP-MD5, 802.1x/EAP-TLS, 802.1x/EAP-TTLS, 802.1x/EAP-PEAP, key management, PSK/TKIP encryption, AES encryption, 802.1x/EAP
Inter Cell Repeating
Inter traffic blocking for public hot spot (PHS) applications for preventing of communication radio client to radio client in a single radio cell.
Network segments on layer2 possible. Per SSID one VLAN ID available. Static VLAN configuration according IEEE 802.1q; up to 256 VLANs supported.
Application portals - General
For the integrated solutions, i.e. phone book, mini call centre, etc, the individual application portals are available. Each user in the system has access to their telephones and settings. Individual user names/PIN are accessed via the user portal.
SIP Clear Channel
Support of RFC 4040 – SIP Clear Channel for remote maintenance of ISDN TK Systems via ALL-IP
Fax transmission
4 channels can be simultaneous converted from LAN fax T.38 to T.30, ISDN an analogue. No matter how high the system load, for each channel is supported by a DSP.
Backup routes
Unlimited number of backup routes for the automatic selection of outside lines
Calling number transformation
Conversion list of calling numbers; in this list are correlated external and internal numbers.
SIP proxy
Mapping of an unlimited number of SIP single or DDI provider accounts to SIP single user or to VoIP PABXs.
SIP registrar
SIP users are able to sign on at the media gateway with registration and authentication.
SIP ISDN gateway
Transparent conversion of connections of a VoIP PABX to ISDN trunk
Number of simultaneous VoIP connections
No software limitation
SIP link
Switching of incoming and outgoing calls like SIP trunks, though without DDI, but with single calling number blocks, with or without registerin
Call router
Flexible switching of all calls according rules; conditions for call forwarding (routing). List with rules or rule chains for manipulating the signalled target calling number
CLID conversion
Manipulation of calling party numbers in incoming calls; add a prefix to incoming numbers, to route corresponding calls via a certain SIP account.
ISDN SIP gateway
Transparent conversion of ISDN PABX connections to single SIP provider, or to DDI SIP trunk access
SIP user
No software limitation
Features hybrid connections
Echo cancellation according G.168, Comfort Noise Generation CNG
SIP 2.0
RFC 3261 conform. 2327, 2976, 3261, 3262, 3263, 3264, 3311, 3323, 3325, 3428, 3515, 3581, 3608, 3891, 3966, 4028, 3555, 2833, 1035, 2782, 2915, 2617, ...SIP Connect 1.1
SIP protocols
SIP properties
SIP secure (TLS), establish secure calls
Debug Trace
Record of all data streams via console and WEB Configuration. Trace format text and PCAP
Backup routes
Fallback routes, if a connection could not be established via the prior route
DTMF Support
DTMF Inband and out of band RFC 2976 (SIP Info) and RFC 2833 (RTP Payload Type/outband) support.
Audio codec support
G.711, G.726 (32 kbps), G.729, G.722, HQ Audio for VoIP-VoIP connections
Media protocols
Early Media Connect
Early Media Connect vconnectsaudio or data stream before call complete.
DHCP Server and Client
IPv4/ IPv6 Dual Stack
Parallel mode IPv4/ IPv6 supported
Neighbor Discovery Protocol: Router Discovery, Prefix Discovery, Parameter Discovery, Address Resolution, Static configuration of neighbors, IPv6 Router AAdvertisment Option for DNS Configuration (trough ND)
Unique Local IPv6 Unicast Addresses
IPv6 Adressing
IPv6 Stateless address auto-configuration (SLAAC), Manual address configuration, General-prefix support for address configuraion (user and prefix delegation DHCPv6), Duplicate Address Detection
ICMPv6 (router & host)
Destination Unreachable, Packet too big, Time exceeded, Echo Request
Routing Protocols
Static Routes
Multicast for IPv6
Firewall via IPv6
IPSec for IPv6
Open Source
This product is based on Open Source software, the use is subject to separate license terms. More details can be found in the download area of the product. By purchasing and using the product, you accept these license terms.
VDSL2-Vectoring (ITU G.993.5) kompatible to VDSL2-Vectoring connections
VDSL2 (ITU G.993.2) compatible to VDSL2 connection of Deutsche Telekom
VDSL Profile
VDSL Profile 8a, 8b, 8c, 8d, 12a, 12b, 17a, 30a
Compatible to ADSL/ADSL2/ADSL2+, Annex B / J
ADSL1, ADSL2 or ADSL2+ with internal ADSL2+-Modem
WLAN standards
802.11n (Mimo 2x2); 802.11b; 802.11g; 802.11a; 802.11h
1Modes 2,4 GHz Operation: 802.11b only; 802.11g only, 802.11b/g/n mixed; 802.11b/g/n mixed long; 802.11b/g/b mixed short; 802.11b/g/n ; 802.11g/n; 802.11n only; 5 GHz Operation: 802.11a only; 802.11a/n; 802.11n
Data rate for 802.11n (2,4 / 5GHz)
MCS0-15 enables physical rates up to 150 Mbps at 20 MHz channels bandwidth, 2 streams, short guard interval; MCS0-15 enables physical data rates up to 300 Mbps at 40 MHz channels bandwidth, 2 streams, short guard interval
Data rates for 802.11a,h (5 GHz)
54, 48, 36, 24, 18, 12, 9 and 6 Mbps (OFDM modulation)
Data rates for 802.11b,g (2.4 GHz)
11, 5.5, 2 und 1 Mbps (DSSS modulation); 54, 48, 36, 24, 18, 12, 9 and 6 Mbps (OFDM modulation)
Bandwidth (802.11n)
20/40 MHz (bundling of two adjoining 20 MHz channels to one 40 MHz channel)
Frequency bands 2.4 GHz indoor/outdoor (EU)
2.4 GHz Indoor/Outdoor (2412-2472 MHz) max. 100 mW EiRP. The permitted transmission power may vary in countries outside the EC.
Frequency bands 5 GHz outdoor (EU)
5 GHz outdoor (5470-5725 MHz) max. 200 mW EiRP allowed (Germany). The permitted transmission power may vary in other countries.
Frequency bands 5 GHz indoor (EU)
5 GHz indoor (5150-5350 MHz) max. 200 mW EiRP allowed (Germany). The permitted transmission power may vary in other countries.
Broadcast SSID
On/off switchable
Depending on the complexity of configuration up to 16 service sets per radio module, with virtual access points and own MAC address per SSID
Automatic Rate Selection (ARS)
Automatic usage of the optimized data rate
WLAN operation
WLAN Accesspoint operation
RTS/CTS threshold adjustable
Short guard interval (802.11n)
On/off switchable; increase of throughput by reduction of the guard intervals from 800ns to 400ns
Number of spatial streams (802.11n)
1 or 2
Extended Performance Feature
Beamforming, MRC (Maximum Ratio Combining), Block-Acknowlegde
TX power @ 2,4 GHz
Max. 20dBm
TX power @ 5 GHz
Max. 17dBm
Receiver Sensitivity @ 2.4 GHz 802.11n 20 MHz
MCS0 -95 dBm; MCS1 -94 dBm; MCS2 -92 dBm; MCS3 -88 dBm; MCS4 -85 dBm; MCS5 -81 dBm; MCS6 -80 dBm; MCS7 -78dBm; MCS8 -95 dBm; MCS9 -94 dBm; MCS10 -91 dBm; MCS11 -87 dBm; MCS12 -84 dBm; MCS13 -81 dBm; MCS14 -79 dBm; MCS15 -77 dBm
Receiver Sensitivity @ 5 GHz 802.11n 20 MHz
MCS0 -96 dBm; MCS1 -93 dBm; MCS2 -91 dBm; MCS3 -88 dBm; MCS4 -85 dBm; MCS5 -81 dBm; MCS6 -79 dBm; MCS7 -77 dBm; MCS8 -94 dBm; MCS9 -92 dBm; MCS10 -90 dBm; MCS11 -87 dBm; MCS12 -84 dBm; MCS13 -80 dBm; MCS14 -78 dBm; MCS15 -76 dBm
Receiver Sensitivity @ 5 GHz 802.11n 40 MHz
MCS0 -91 dBm; MCS1 -89 dBm; MCS2 -87 dBm; MCS3 -84 dBm; MCS4 -81 dBm; MCS5 -78 dBm; MCS6 -76 dBm; MCS7 -74 dBm; MCS8 -90 dBm; MCS9 -89 dBm; MCS10 -87 dBm; MCS11 -83 dBm; MCS12 -80 dBm; MCS13 -77 dBm; MCS14 -75 dBm; MCS15 -73 dBm
TX power @ 2,4 GHz 802.11n 20 MHz
MCS0/8 19 dBm; MCS1/9 19 dBm; MCS2/10 19 dBm; MCS3/11 19 dBm; MCS4/12 19 dBm; MCS5/13 19 dBm; MCS6/14 19 dBm; MCS7/15 19 dBm
TX power @ 5 GHz 802.11n 20 MHz
MCS0/8 23 dBm; MCS1/9 23 dBm; MCS2/10 22 dBm; MCS3/11 21 dBm; MCS4/12 20 dBm; MCS5/13 19 dBm; MCS6/14 18 dBm; MCS7/15 18 dBm
TX power @ 5 GHz 802.11n 40 MHz
MCS0/8 19 dBm; MCS1/9 19 dBm; MCS2/10 19 dBm; MCS3/11 19 dBm; MCS4/12 19 dBm; MCS5/13 18 dBm; MCS6/14 17 dBm; MCS7/15 17 dBm
Receiver Sensitivity @ 2.4 GHz 802.11b/g
1 Mbps -91 dBm; 2 Mbps -90 dBm; 5.5 Mbps -89 dBm; 11 Mbps -88 dBm; 6 Mbps -90 dBm;9 Mbps -89 dBm; 12 Mbps -88 dBm; 18 Mbps -86 dBm; 24 Mbps -83 dBm; 36 Mbps -80 dBm; 48 Mbps -76 dBm; 54 Mbps -74 dBm
TX power @ 2,4 GHz 801.11b/g
1 Mbps 19 dBm; 2 Mbps 19 dBm; 5,5 Mbps 19 dBm; 11 Mbps 19 dBm; 6 Mbps 19 dBm;9 Mbps 19 dBm; 12 Mbps 19 dBm; 18 Mbps 19 dBm; 24 Mbps 19 dBm; 36 Mbps 19 dBm; 48 Mbps 19 dBm; 54 Mbps 19 dBm
Receiver Sensitivity @ 5 GHz 802.11a/h
6 Mbps -95 dBm;9 Mbps -94 dBm; 12 Mbps -93 dBm; 18 Mbps -90 dBm; 24 Mbps -88 dBm; 36 Mbps -84 dBm; 48 Mbps -82 dBm; 54 Mbps -81 dBm
Tx Power @ 5 GHz 802.11a/h
6 Mbps -94 dBm;9 Mbps -93 dBm; 12 Mbps -92 dBm; 18 Mbps -90 dBm; 24 Mbps -88 dBm; 36 Mbps -85 dBm; 48 Mbps -82 dBm; 54 Mbps -80 dBm
Receiver Sensitivity @ 5 GHz
Internet Protocol Security for establishing VPN connections
IPSec Algorithms
DES (64 Bit), 3DES (192 Bit), AES (128,192,256 Bit), CAST (128 Bit), Blowfish (128-448 Bit), Twofish (256 Bit); MD-5, SHA-1,SHA-2 (256,384,512), RipeMD160, Tiger192 Hashes
IPSec hardware acceleration
Integrated hardware acceleration for IPSec encryption algorithms DES, 3DES, AES
Number of VPN Tunnel
5 simultaneous VPN connections. Expentable via license up to 10 simultaneous VPN connections
Authentication of IPSec connections at a RADIUS server. Additionally the IPSec peers, which were configured on a RADIUS server, can be loaded into the gateway (RADIUS dialout).
The possibility to operate Quality of Service (traffic shaping) inside of an IPSec tunnel
IPSec Dead Peer Detection (DPD)
Continuous control of IPSec connection
IPSec dynamic DNS
Enables the registering of dynamic IP addresses by a dynamic DNS provider for establishing a IPSec connection.
By activating of NAT on an IPSec connection it is possible, to implement several remote locations with identical local IP addess networks in different IP nets for the VPN connection
Support of NAT-Traversal (Nat-T) for the application at VPN lines with NAT
IKEv1 & IKEv2: IPSec key exchange via preshared keys or certificates
IPSec IKE Config Mode
IKE Config Mode server enables dynamic assignment of IP addresses from the address pool of the company. IKE Config Mode client enables the router, to get assigned dynamically an IP address.
IPSec IKE XAUTH (Client/Server)
Internet Key Exchange protocol Extended Authenticaion client for login to XAUTH server and XAUTH server for loging of XAUTH clients
IPSec IKE XAUTH (Client/Server)
Inclusive the forwarding to a RADIUS-OTP (One Time Password) server (supported OTP solutions see
certificates (PKI)
Support of X.509 multi-level certificates compatible to Micrososft and Open SSL CA server; upload of PKCS#7/8/10/12 files via TFTP, HTTP, HTTP, LDAP, file upload and manual via Web Interface
Certificate Revocation Lists (CRL)
Support of remote CRLs on a server via LDAP or local CRLs
Certificates management via SCEP (Simple Certificate Enrollment Protocol)
IPSec Multi User
Enables the Dial-in of several IPSec clients via a single IPSec peer configuration entry
IPSec IPComp
IPSec IPComp data compression for higher data throughput via LZS
Support of Point to Point Protocol (PPP) for establishing of standard PPP connections, inclusive the Multilink extension MLPPP for the bundeling of several connections
Enables the easy routing of IP via ATM
Packet size controling
Adaption of PMTU or automatic packet size controling via fragmentation
DHCP client / server / proxy for simplified TCP/IP configuration
DNS client, DNS server, DNS relay and DNS proxy
DNS forwarding
Makes it possible to forward DNS queries from any specified domain for resolution by certain DNS servers.
Makes it possible to assign dynamic IP addresses through a dynamic DNS provider, for instance when setting up VPN connections.
PPPoE (client)
Point-to-Point Protocol over Ethernet for creating PPP connections over Ethernet/DSL (RFC2516).

be.IP plus V2 Part number: 5510000586

ISDN TE-Adapter Part number: 5520000161

be.IP plus License package Part number: 5500001872

19" rack mount kit 5520000140

Weiterführende Links

Request Info