Spanish EnglishGerman



bintec Gigabit PoE Injector

1-Port PoE Injector according IEEE 802.3af


  • Power supply via LAN cable up to 100 m
  • Autosensing to detect PoE devices
  • Integrated 100-240 V power supply





bintec Gigabit PoE Injector

Power supply for single PoE devices via the local network (LAN). The perfect accessory for all bintec Access Points and for IP phone with PoE. The Gigabit interface allow the flexible usage of LAN devices with Gigabit interface.

LAN
10/100/1000 Mbit/s, Autosensing, RJ-45 sockets shield
Output power
Output power: -48V / 15,4 Watt / Pin assignment: 4/5(+), 7/8(-) According IEEE 802.3af
Input power requirements
90 to 264 V AC 0,5A @ 110V-240V
Status LED
One Multi-colour LED for status indication: Yellow = AC Powered GREEN = Device powered
Dimensions
Approx. 53 mm x 140 mm x 32,5 mm (width x lenght x hight)
Environment
Temperature operating: 0°C to 40°C rel. humidity max. 90% (non condensing); storage: -20°C to 70°C
Content of delivery
EU-Power cable Printed QIG
Standards and certifications
Electromagnetic Compatibility Directive 2014/30/EU and the Low Voltage Directive 2014/35/EU EN 55032: 2012+ AC:2013; EN 55024: 2010; EN 61000-3-2: 2014; EN 61000-3-3: 2013; EN60950 -1:2006+A11:2009+A1:2010+A12:2011+A2:201
Gigabit PoE Injector (5530000338)
PoE Injector for LAN 10/100/1000 Mbps, 100-240V, EU plug, output 48V/0.35A; suitable for Access Points, IP phones, etc.
Request Info
X