Products
Home  > 
 >  Data
 >  Wireless LAN
   

bintec W2004n

High Performance WLAN Access Point

  • High performance radio module for simultaneous 2.4/5GHZ op.
  • 802.11n 3x3 Mimo technolgy with up to 2x450 Mbps PHY rate
  • 200 mW transmitter power at 5 GHz band
  • Managed by integr. WLAN controller or stand-alone operation
  • Two Gigabit Ethernet ports with PoE (Power over Ethernet)
  • Integrated Mimo antennas for 2.4/5 GHz
  • Certified for operation in medical environments
 

bintec W2004n

High Performance WLAN Access Point

The bintec W2004n is an 11n access point with two single-band radio modules, allowing the device to operate in both the 2.4 GHz and 5 GHz bands simultaneously. The both radio modules with mimo 3x3 technique offer 2x450 Mbps bandwidth.

Product description

WiFi Certified
The unit is a perfect match for indoor wireless infrastructures designed to provide access over both frequencies. Smartphones, tablets, and older notebooks can connect to the the 2.4 GHz network while high-performance notebooks connect to the 5 GHz network.

Due to a high-performance radio module the W2004n works with up to 200 mW transmission power at the 5 GHz band. This is a duplication of the transmission power compared to the 2.4 GHz band.
You can run the bintec W2004n in any of three different modes. You can choose to operate the device as a stand-alone access point or manage it from a centrally-located bintec WLAN Controller. The W2004n can also function as a WLAN Controller itself (master access point) and manage up to six APs. The bintec WLAN Controller solution can be used in wireless networks with anywhere from 2 to 150 access points. The bintec WLAN Controller solution provides a scalable, end-to-end solution that lets you expand your network without migrating to a new technology. This flexibility protects your investments in existing infrastructures.

The clean lines and elegant design of the W2004n make it an appealing choice for wall- or ceiling-mounting. It looks perfectly at home in high-end office spaces, hotels, and hospitals. Despite its handsome appearance, this access point also knows how to blend in. We've placed the antennas inside the housing, and you can turn off the LEDs to eliminate distractions.

The included mounting hardware lets you quickly and easily mount the unit onto a ceiling or wall. For protection against theft, the device is also compatible with Kensington locks. As an alternative to wall-or ceiling-mounting, you can also place the device on a desktop thanks to the included rubber feet.

Take advantage of all the benefits our optional bintec HotSpot solution has to offer when using the W2004n as a stand-alone access point or together with the WLAN Controller software. Hotspots benefit hotels and restaurants, for instance, by allowing them to provide controlled wireless access to their customers.

The W2004n also supports handover and roaming. That means with a properly set up and surveyed wireless network managed by a bintec WLAN Controller, wireless devices enjoy seamless coverage throughout the network. And seamless coverage is a must if you are, for instance, implementing a VoWLAN (Voice over WLAN) solution or using wireless barcode scanners for logistics applications.

The W2004n gives you green IT right out of the box with its automatic energy-saving features. If no client is connected, the AP turns off any circuits not currently in use, downshifting to mimo 1x1. The Gigabit Ethernet ports support the energy-saving 802.3az standard, ensuring only as much energy as needed is used.
In addition to the Access Point operation modes the device could be used as WLAN client for direct connecting of ethernet devices (e.g. printers), to connect ethernet devices with existing wireless LANs.
Furthermore it is possible to use the device as bridge in Point-to-Multipoint operation mode with up to eight links. By the fact that a radio module can be used as Access Point and simultaneously as Bridgelink Master, it's easy to realize efficient Wireless Backbones. It is not possible to use a WLAN Controller at these both operating modes.

Variants


bintec W2004n (5510000320)

W2004n, WLAN Access Point with a dual concurrent radio module according 802.11abgn (2.4/5 GHz) Mimo 3x3, 2 Gigabit ETH, PoE, integr. antennas, incl. wall/ceiling mounting, incl. WLAN Controller license for Master AP, shipment without 100-240V wall adapter

Options


Pick-up Service / Warranty Extension

Service Package 'medium' (5500000812)
Warranty extension of 3 years to a total of 5 years, including advanced replacement for bintec elmeg products of the category 'medium'. Please find a detailed description as well as an overview of the categories on www.bintec-elmeg.com/servicepackages.


Add-ons

PS-EURO-Wx003n/Wx004n (5500001254)
Wall power supply with EU-plug for W1003n, W2003n, W2003n-ext, W2004n

Wall mounting Wx003n/4n/4Ge-LE (5500001278)
Wall and ceiling mounting (spare part) for W1003n, W2003n, W2003n-ext, W2004n, 4Ge-LE

Gigabit PoE Injector (5530000082)
PoE Injector for LAN 10/100/1000 Mbps, 100-240V, EU plug, output 48V/0.35A; suitable for Access Points, IP phones, etc.

Downloads

w-series W Series
Documentation to bintec W-Series Documentation to bintec W-Series
Release 9.1. Rev. 7 Patch 1 Release 9.1. Rev. 7 Patch 1
Release 9.1. Rev. 7 Release 9.1. Rev. 7
Release 9.1. Rev. 5 Patch 1 Release 9.1. Rev. 5 Patch 1
Release 9.1. Rev. 5 Release 9.1. Rev. 5
Release 9.1. Rev. 2 Patch 7 Release 9.1. Rev. 2 Patch 7
Release 9.1. Rev. 2 Patch 4 Release 9.1. Rev. 2 Patch 4
Release 9.1. Rev. 2 Patch 3 Release 9.1. Rev. 2 Patch 3
First official release for bintec W series (W1003n, W2003n, W2003n-ext, W2004n)