Home  > 
 >  Data
 >  Wireless LAN

bintec W2003n-ext

Business WLAN Access Point

  • Dual concurrent radio for simulanteuos 2.4/5 GHZ operation
  • 802.11n 2x2 Mimo technolgy with up to 2x300 Mbps PHY rate
  • 200 mW transmitter power at 5 GHz band
  • Managed by integr. WLAN controller or stand-alone operation
  • Two Gigabit Ethernet ports with PoE (Power over Ethernet)
  • Four external RSMA antennas 2.4/5GHz
  • Certified for operation in medical environments

bintec W2003n-ext

Business WLAN Access Point

The bintec W2003n-ext is an 11n access point with two dual-band radio modules with external antennas, allowing simultaneous operation in both the 2.4 GHz and 5 GHz bands. A high-performance radio module enables up to 200 mW transm. power at 5 GHz band.

Product description

The device is equipped with external dual-band antennas. This makes it possible to operate both radio modules on the same frequency, e.g. two antennas operating at 2.4 GHz or two antennas at 5 GHz. The external antennas are removable, allowing you to operate the device with a separate omnidirectional, sector, or directional antenna.

Due to a high-performance radio module the W2003n-ext works with up to 200 mW transmission power at the 5 GHz band. This is a duplication of the transmission power compared to the 2.4 GHz band.

You can operate the bintec W2003n-ext access point in any of three different modes. You can operate the device as a stand-alone access point or manage it from a central bintec WLAN Controller. The W2003n-ext can also function as a WLAN Controller (master access point) itself to manage up to six APs. The bintec WLAN Controller solution can be used in wireless networks with anywhere from 2 to 150 access points. The bintec WLAN Controller solution provides a scalable, end-to-end solution that lets you expand your network without migrating to a new technology. This flexibility protects your investments in existing infrastructures.

The included mounting hardware lets you quickly and easily mount the unit onto a ceiling or wall. For protection against theft, the device is also compatible with Kensington locks. As an alternative to wall-or ceiling-mounting, you can also place the device on a desktop thanks to the included rubber feet.

Take advantage of all the benefits our optional bintec HotSpot solution has to offer when using the W2003n-ext as a stand-alone access point or together with the WLAN Controller software. Hotspots benefit hotels and restaurants, for instance, by allowing them to provide controlled wireless access to their customers.

The W2003n-ext also supports handover and roaming. That means with a properly set up and surveyed wireless network managed by a bintec WLAN Controller, wireless devices enjoy seamless coverage throughout the network. And seamless coverage is a must if you are, for instance, implementing a VoWLAN (Voice over WLAN) solution or using wireless barcode scanners for logistics applications.

The W2003n-ext. gives you green IT right out of the box with its automatic energy-saving features. If no client is connected, the AP turns off any circuits not currently in use, downshifting to mimo 1x1. The Gigabit Ethernet ports support the energy-saving 802.3az standard, ensuring only as much energy as needed is used.
In addition to the Access Point operation modes the device could be used as WLAN client for direct connecting of ethernet devices (e.g. printers), to connect ethernet devices with existing wireless LANs.
Furthermore it is possible to use the device as bridge in Point-to-Multipoint operation mode with up to eight links. By the fact that a radio module can be used as Access Point and simultaneously as Bridgelink Master, it's easy to realize efficient Wireless Backbones. It is not possible to use a WLAN Controller at these both operating modes.


bintec W2003n-ext (5510000325)

W2003-ext, WLAN Access Point with a dual concurrent radio module according 802.11abgn (2.4/5 GHz) Mimo 2x2, two Gigabit ETH, PoE, 4 ext. antennas, incl. wall/ceiling mounting, incl. WLAN Controller lic. for Master AP, shipm. Without 100-240V wall adapter


Pick-up Service / Warranty Extension

Service Package 'small' (5500000810)
Warranty extension of 3 years to a total of 5 years, including advanced replacement for bintec elmeg products of the category 'small'. Please find a detailed description as well as an overview of the categories on


ANT-RSMA.STD-2+5G white (5500001349)
Standard Dual-band antenna (2.4/5GHz) with RSMA connector for W2003n-ext in white


PS-EURO-Wx003n/Wx004n (5500001254)
Wall power supply with EU-plug for W1003n, W2003n, W2003n-ext, W2004n

Wall mounting Wx003n/4n/4Ge-LE (5500001278)
Wall and ceiling mounting (spare part) for W1003n, W2003n, W2003n-ext, W2004n, 4Ge-LE

Gigabit PoE Injector (5530000082)
PoE Injector for LAN 10/100/1000 Mbps, 100-240V, EU plug, output 48V/0.35A; suitable for Access Points, IP phones, etc.


w-series W Series
Documentation to bintec W-Series Documentation to bintec W-Series
Release 9.1. Rev. 7 Patch 1 Release 9.1. Rev. 7 Patch 1
Release 9.1. Rev. 7 Release 9.1. Rev. 7
Release 9.1. Rev. 5 Patch 1 Release 9.1. Rev. 5 Patch 1
Release 9.1. Rev. 5 Release 9.1. Rev. 5
Release 9.1. Rev. 2 Patch 7 Release 9.1. Rev. 2 Patch 7
Release 9.1. Rev. 2 Patch 4 Release 9.1. Rev. 2 Patch 4
Release 9.1. Rev. 2 Patch 3 Release 9.1. Rev. 2 Patch 3
First official release for bintec W series (W1003n, W2003n, W2003n-ext, W2004n)